Doug,

On the pair I have: the TW-2 has the power jack close to the bottom of 
the rear panel.   The TW-1  has the jack higher on the rear panel.

To confirm this, power the one you think is the TW-2 and  press and 
release  both the far left and far right buttons at the same time. 
This is how you switch between bands on the TW-2, so you will hear it 
announce   each band as you press the buttons and cycle through the bands.

73, Steve KW3A

On 4/21/2015 12:16 AM, Doug Payne wrote:
> HI Colin and others,
>
> How do I distinguish between the TW-1 and the Tw-2? The power jacks are in
> different locations, but I can't remember which unit is which. Thanks.
>
> --Doug,
> AC7T
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Colin McDonald
> Sent: Monday, April 20, 2015 3:59 PM
> To: [log in to unmask]
> Subject: Re: tw-1
>
> HRO was throwing in the wallwarts with the tw1/2 when I bought my tw1 years
> ago...it also came with the pigtail cord.
> The same wallwart works for both the tw1 and 2...my tw2 didn't come with a
> power supply and one wasn't available any longer.
> It's a very heavy duty, what looks like at least a 1amp or more wallwart
> too.
>
> 73
> Colin
> -----Original Message-----
> From: John Miller
> Sent: Monday, April 20, 2015 4:50 PM
> To: [log in to unmask]
> Subject: Re: tw-1
>
> I just run mine off the same power supply as the rest of my station. I never
> had a wall wart with mine, it didn't come with one, it wouldn't have even
> fit in the box.
> ----- Original Message -----
> From: "Butch Bussen" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Monday, April 20, 2015 4:37 PM
> Subject: Re: tw-1
>
>
>> Not all of them came with an adapter.  I think they will run on from 9
>> to twelve volts, center positive.
>> 73
>> Butch
>> WA0VJR
>> Node 3148
>> Wallace, ks.
>>
>>
>> On Mon, 20 Apr 2015, Fred Olver wrote:
>>
>>> Speaking of the TW one, I seem to have misplaced the AC/DC adapter for
>>> mine a=
>>> nyone have one they would be willing to let me have? Fred over
>>>
>>> Sent from my iPhone
>>>
>>>> On Apr 19, 2015, at 7:05 PM, Gerry Leary <[log in to unmask]> wrote:
>>>> =20
>>>> Both Ronald Milleman and David would have already asked for one. Since I
>>>> d=
>>> o h=3D
>>>> ave two of them I decided to sell both. I am going to take the money
>>>> from t=
>>> h=3D
>>>> ose and buy a used allograft W2. It will work with my ham pod.
>>>> =20
>>>> Sent from my iPhone this time=3D20
>>>> =20
>>>>> On Apr 19, 2015, at 9:26 AM, Gary Lee <[log in to unmask]> wrote:
>>>>> =3D20
>>>>> For Jerry:
>>>>> =3D20
>>>>> If no one has taken it, I=3D3DE2=3D3D80=3D3D99ll take that tw-1.
>>>>> =3D20
>>>>> How much and how to pay?
>>>>> =3D20
>>>>> =3D20
>>>>> Gary Lee
>>>>> [log in to unmask]
>>>>> =3D20
>>>>> =3D20
>>>>> =3D20
>>>>>> On Apr 18, 2015, at 10:52 PM, Gerry Leary <[log in to unmask]> wrote:
>>>>>> =3D3D20
>>>>>> Oh Alan, you let the magic smoke out. You know you can't put it back
>>>>>> =3D=
>>> 3D
>>>>> in very=3D3D3D
>>>>>> easily! If you need another I do have a TW one that I would like to
>>>>>> =3D3=
>>> D
>>>>> sell. I=3D3D3D
>>>>>> am also looking for the Ella craft meter. Have you had any experience
>>>>>> =3D=
>>> 3D=3D
>>>> =20
>>>>> with i=3D3D3D
>>>>>> t?
>>>>>> =3D3D20
>>>>>> Sent from my iPhone this time=3D3D3D20
>>>>>> =3D3D20
>>>>>>> On Apr 16, 2015, at 6:15 PM, Alan R. Downing <[log in to unmask]> wrote:
>>>>>>> =3D3D3D20
>>>>>>> Hello Steve, remember that a hampod connected to a Power Master II
>>>>>>> =3D3=
>>> D
>>>>> gives y=3D3D3D
>>>>>> ou
>>>>>>> a lot of info, including a tone for tuning up a tube amp.  One nice
>>>>>>> =3D=
>>> 3D
>>>>> featur=3D3D3D
>>>>>> e
>>>>>>> of this arrangement is that you don't have to worry about melting a
>>>>>>> =3D=
>>> 3D
>>>>> TW-1
>>>>>>> like I did several weeks ago when I ran a bit over 4.0 KW thru one,
>>>>>>> =3D=
>>> 3D
>>>>> Hi.  I=3D3D3D
>>>>>> =3D3D20
>>>>>>> bought a 10 KW coupler for my Power Master II, so I don't have to
>>>>>>> =3D3D=
>>>
>>>>> worry
>>>>>>> about cooking anything.  The TW-1 has a very low threshold for power,
>>>>>>> =3D=
>>> 3D=3D
>>>> =20
>>>>> and
>>>>>>> when you run more goo thru it than you are supposed to, smelly things
>>>>>>> happen!
>>>>>>> =3D3D3D20
>>>>>>> Alan - N7MIT
>>>>>>> =3D3D3D20
>>>>>>> =3D3D3D20
>>>>>>> =3D3D3D20
>>>>>>> Alan R. Downing
>>>>>>> Phoenix, AZ
>>>>>>> =3D3D3D20
>>>>>>> -----Original Message-----
>>>>>>> From: For blind ham radio operators =3D3D
>>>>> [mailto:[log in to unmask]]=3D3D3D
>>>>>> =3D3D20
>>>>>>> On Behalf Of Steve Forst
>>>>>>> Sent: Thursday, April 16, 2015 2:42 PM
>>>>>>> To: [log in to unmask]
>>>>>>> Subject: Re: What would we like to improve our ham radio
>>>>>>> =3D3D3D20
>>>>>>>      A few days late, but I'll throw this one out:  How about an
>>>>>>> inline=3D3D3D20
>>>>>>> tuning aid for  adjusting manual tuners or tube amps?   Most of
>>>>>>> us=3D3D=
>>> 3D2=3D
>>>> 0=3D3D
>>>>> =3D20
>>>>>>> aren't able to dig into the  amp to hook up an oscillator, or =3D3D
>>>>> whatever.=3D3D3D20=3D3D3D
>>>>>> =3D3D20
>>>>>>> A unit to go in the feedline and  act like a TW-1 with tones
>>>>>>> for=3D3D3D=
>>> 20
>>>>>>> getting a low SWR, or  for tuning an amp for   high power would be
>>>>>>> =3D3=
>>> D
>>>>> nice.
>>>>>>> =3D3D3D20
>>>>>>> 73, Steve KW3A
>>>
>>>
>
>
>