Subject: | |
From: | |
Reply To: | |
Date: | Fri, 26 Jun 2015 08:51:19 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Thanks! I was surprized, because I think this supply was the one sold with
the flex-3000, so I would have expected better.
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Martin G. McCormick
Sent: Friday, June 26, 2015 7:36 AM
To: [log in to unmask]
Subject: Re: if its not one thing, its another.
It certainly won't hurt but I've found those measures hit and miss.
They are based in sound engineering but that RF sure has a way of getting
past filters through such things as the chassis ground or the microphone and
speaker cables at times.
One might have to put a big toroid on each lead of the power supply
as well as each side of the AC power cord.
One way to make a switcher real cheap is to eliminate all those
heavy expensive toroids and shunt capacitors. The supply will run a computer
just fine and be very light to carry around but can double as an all-band
transmitter. I am proposing a new certificate. It's the WACPSAWAB or Worked
All Continents on Power supply At Once on All Bands. Good luck.
Martin WB5AGZ
howard kaufman writes:
> For some reason, when I have three radios hooked up to the same
> supply, I can't run the tmv-71 on high power.
>
> I put the radio on a switching supply that I have, and now it works.
>
> Unfortunately I get carriers every 25 khz or so.
>
> I wonder if a big toroid ring to wrap the power cord in will help?
|
|
|