It won't work with the menus in the SG.  Other than that I'd expect it to 
work to some extent at least.

-----Original Message----- 
From: Mike Keithley
Sent: Friday, May 15, 2015 11:40 AM
To: [log in to unmask]
Subject: Re: arcp-590

Does JJRadio work with the 590-SG?

----- Original Message -----
From: Jim Shaffer <[log in to unmask]>
To: [log in to unmask]
Date: Friday, May 15, 2015 9:22 am
Subject: Re: arcp-590

>
>
> I like JJRadio for this sort of thing.  You can jump to functions and
> readings using a Fields menu.  The main display has a dynamic frequency
> readout plus indications of which VFO is in use, the current S-meter
> reading, and the VOX and split states.  In addition, you can use it to 
> keep
> your log.  See http://www.jjshaffer.net/.
> --
> Jim, ke5al
> -----Original Message----- 
> From: Steve Forst
> Sent: Friday, May 15, 2015 10:55 AM
> To: [log in to unmask]
> Subject: Re: arcp-590
>
> Don't really use the ARCP software.  As for baud rate:   default for the
> serial connection is 9600 and default for the usb is 115200.
>
> The serial and USB ports are independent, and you can  run control
> software on one port and logger on the other with no conflicts.
>
>
> Of course the baude rates need to match in both the radio and software.
>   If you make a change to  the baud rate in the radio, you  need to
> power off the radio and power it  back on for the change to take effect.
>
> 73, Steve KW3A
>
> On 5/15/2015 11:41 AM, howard kaufman wrote:
> > Well I got the 590 control softward talking to the radio.
> >
> > You can send cw from the keyboard with it, very cool!
> >
> > Now I can tab from button to button, and activate those items.
> >
> > Is their a way to jump directly to say frequency entry, and then to 
> > slowly
> > tune the radio?
> >
> > My next challenge is to remotely access the radio, I am just thinking of
> > how
> > to set up a line input and use system access for this part.
> >
> > But first, jumping to functions and adjusting.
> >
> > Anybody using this?
> >
> >
> >
> > On another issue, I see two kenwood choices in n3fjp, but I can't get it
> > talking to the radio.
> >
> > Got the right port, and I am guessing 115,200 baud rate, might be wrong
> > there.
> >
> > Anybody have that interface working?
> >
> >
> >
> >
> >
> > Howard Kaufman MSW LCSW
> >
> >
> >
> >
> >
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com 


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com