Ok thanks Tom. Anyway I have both VFO's unmuted and playing at
the same volume level regardless of where the squelch is turned
on the other VFO. Thanks, Jim WA6EKS
----- Original Message -----
From: Tom Behler <[log in to unmask]
To: [log in to unmask]
Date sent: Fri, 6 Feb 2015 19:50:13 -0500
Subject: Re: Your recommendation locks and unlocks the 71a
Jim:
I just tried my suggestion again for muting and un-muting the
second VFO on
the TMV71A, and the button combination I mentioned operates as I
described
previously.
I have another TMV71A out in the car, but I won't be able to try
that
probably until Sunday, when the XYL and I go on a short road trip
to visit
our son and his family about an hour away.
If I think of it, I'll give things a try on that radio, and let
you know if
I get the same results.
Tom Behler: KB8TYJ
-----Original Message-----
From: For blind ham radio operators
[mailto:[log in to unmask]]
On Behalf Of Jim Gammon
Sent: Friday, February 06, 2015 3:28 PM
To: [log in to unmask]
Subject: Your recommendation locks and unlocks the 71a
Tom, pressing the function button and transmit power button locks
and
fortunately unlocks the radio. Oh, it even keeps it from
transmitting.
Never knew about that function, but it doesn't unmute or mute
either of the
VFO's. Wow, you learn something new everyday. I have been
reading the 590
manual again. Guess I need to read the 71a manual as well. 73,
Jim
----- Original Message -----
From: Tom Behler <[log in to unmask]
To: [log in to unmask]
Date sent: Fri, 6 Feb 2015 08:19:27 -0500
Subject: Re: Issue with muting or listening to both VFO's on the
TMV71A
Jim:
If you don't want the receive on the second VFO to be muted while
using the
dominant VFO, press the function key, plus the TX power button
till you hear
the low beep. The TX power button is the third one in from the
two VFO and
squelch controls.
Does this help?
Tom Behler: KB8TYJ
-----Original Message-----
From: For blind ham radio operators
[mailto:[log in to unmask]]
On Behalf Of Jim Gammon
Sent: Friday, February 06, 2015 1:48 AM
To: [log in to unmask]
Subject: Issue with muting or listening to both VFO's on the
TMV71A
Hello list, I am having a strange thing happen on my 71a which I
must have
caused but can't figure out how to undo. When I am listening on
my 71a, and
have the right VFO on a memory either VHF or UHF and the left VFO
on a
different memory, and have both squelch knobs turned off, the
memory that is
selected will dominate, meaning that if I turn the volume of the
dominant
VFO up it will mute the squelch sound of VFO b. The opposite
also hapmens.
I know that it is possible to have both VFO's work at the same
time without
either one being muted unless you transmit on one and the other
is listening
on the same band. Does that make any sense? The mute button,
righthand most
button on the bottum row, will select between a and b VFO but
when both are
supposed to be active, they are not. I don't know how to explain
this any
better, but maybe one of you TMV71A owners will know what I'm
talking about.
Jim WA6EKS
|