We use the CW features at field day and I use rig control home. It must be 
just some strange thing where I'm lucky enough not to have any computers 
that it happens with and you have 2 that it does. Others, the mileage may 
vary. The software works very well though, that's for sure. I'm glad I 
talked my club in to using it all those years ago.
----- Original Message ----- 
From: "Tom Behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, June 28, 2015 8:10 PM
Subject: Re: Quick Note On Dupe Notivication In N3FJP Field Day Software 
Version 4.7


> John:
>
> Well, I have the issue on both  my old Windows XP laptop, and the Windows 
> 7
> work laptop that I used to do Field Day logging this week-end.
>
> But, for me personally, the issue hasn't been  significant, because I have
> now gotten used to using the N3FJP software with Jaws, and without
> Kimberly's wave files.
>
> I wonder if I'm experienceing the issue because I also do the rig 
> interface,
> and CW sending via the N3FJP software?
>
> Just a thought.
>
> Tom Behler: KB8TYJ'
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of John Miller
> Sent: Sunday, June 28, 2015 6:48 PM
> To: [log in to unmask]
> Subject: Re: Quick Note On Dupe Notivication In N3FJP Field Day Software
> Version 4.7
>
> I have the computers for field day setup with the wave files from 
> Kimberly.
> I have done that for about the last 10 years and I haven't seen that 
> happen
> to be honest. I also have it installed on my computer at home so if anyone
> suggests anything or if I want to experiment with something but not at 
> field
> day I can and I have never in all that time and probably some 7 or 8
> different computers seen the issue you mentioned.
> ----- Original Message -----
> From: "Tom Behler" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, June 28, 2015 2:46 PM
> Subject: Re: Quick Note On Dupe Notivication In N3FJP Field Day Software
> Version 4.7
>
>
>> John:
>>
>> Do you use it with the wave files from Kimberly?
>>
>> This is where the cut-off occurs.  The word duplicate  is still
>> spoken, but it's cut off by the call wave file when the software
>> automatically puts you back in the call field if you have a duplicate
>> contact.
>>
>> Again, not a big deal--just something I have experienced.
>>
>> Tom Behler:  KB8TYJ
>>
>>
>>
>>
>> -----Original Message-----
>> From: For blind ham radio operators
>> [mailto:[log in to unmask]]
>> On Behalf Of John Miller
>> Sent: Saturday, June 27, 2015 9:40 PM
>> To: [log in to unmask]
>> Subject: Re: Quick Note On Dupe Notivication In N3FJP Field Day
>> Software Version 4.7
>>
>> I've never seen that and use the n3fjp software often.
>> ----- Original Message -----
>> From: "Tom Behler" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Saturday, June 27, 2015 1:17 PM
>> Subject: Quick Note On Dupe Notivication In N3FJP Field Day Software
>> Version
>> 4.7
>>
>>
>>> Hello, all.
>>>
>>>
>>>
>>> I just tested the dupe notification function in version 4.7, the
>>> newest version of the N3FJP Field Day logging software, and it works
>>> fine.
>>>
>>>
>>>
>>> However, if you use the wave files for edit field identification when
>>> tabbing through a log entry, the dupe function speaks, but is cut off
>>> very quickly when getting back to the call field.
>>>
>>>
>>>
>>> I have found this in other N3FJP software programs as well.
>>>
>>>
>>>
>>> Not a big deal for me, but just something to be aware of.
>>>
>>>
>>>
>>> Good luck to all who will be doing FD.
>>>
>>>
>>>
>>> Hope to see you on the air!
>>>
>>>
>>>
>>> Tom Behler: KB8TYJ
>>>
>>>