Subject: | |
From: | |
Reply To: | |
Date: | Wed, 24 Dec 2014 06:08:40 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Thank you.
----- Original Message -----
From: Matt Arthur <[log in to unmask]>
To: [log in to unmask]
Date: Tuesday, December 23, 2014 4:05 pm
Subject: Re: Kenwood Mc60A desktop mic
>
>
> Hi Mike,
> You don't need the batteries in the mic to use it with the ts590.
> If you look at the mic with the screan you talk in to facing you you
> will find two switches on the top of the mic it's self.
> The one closest to you keep that switch away from you in other wards off.
> behind it there is a preamp switch have that pulled tward you and will
> then be on.
> it will work fine.
> Thanks 73 Matt ka0pqw
> On 12/23/2014 4:46 PM, Mike Keithley wrote:
> > Hello list,
> >
> > Does anyone here use the Kenwood MC60A desktop mic? I ordered one with my TS590, and I can't figure out how to insert the batteries to power the preamp. I got the PDF manual, and it talks about removing four screws to get at the battery compartment. But the bottom of my unit has six screws, four of which hold the rubber feet to the case. I took all the screws out except for the two screws holding what I think is the impedance switch but can't get the bottom plate off. The fit is so snug I can't insert the blade of a screwdriver to pry it off.
> >
> > Thanks for any help.
> >
> > So does anyone here use this mic?
> >
|
|
|