I had to reset my ac log to kenwood 2 in the rig interface. It was
working with the kenwood setting just above the kenwood 2 setting, but
yesterday, it wouldn't connect with the radio, so after trying
everything I could think of, I changed the setting to kenwood 2, and it
worked
I have no clue why it changed, but it did!
Mike
KD2CDU
On 5/27/2015 11:14 AM, Steve Forst wrote:
> You only need one instance of the virtual comm driver, but only one
> program can be using it at a time. Be sure the ARCP program is closed
> and that nothing else is using that virtual comm port when you start
> the logger.
> Since it works with the ARCp, I'm sure it is just a simple setting
> tweak in the N3FJP that is needed. I would confirm all the settings in
> the ARCP, such as comm port, baud, parity, handshaking, etc., and set
> up N3FJP the exact same way. I did have the demo version running here
> last fall, and had it working quickley using the same settings that
> work for ARCP, XMlog, and Writelog.
>
> If you want to run both ARCP and N3FJP at the same time, you would need
> to run one on the radio's USB port via the virtual comm port, and the
> other on the radio's serial port, using either a serial connection to
> the pc, or use of a serial to USB adapter (which will give you another
> virtual comm port unrelated to the Kenwood driver).
>
> 73, Steve KW3A
>
> On 5/27/2015 10:46 AM, howard kaufman wrote:
>> I must be slow, but I can't get n3fjp talking to my ts-590.
>>
>> I can get the arcp software working.
>>
>> Do I need separate virtual comports for each program?
>>
>> I have to try jjradio, but I am concerned I will have the same problem.
>>
>> The other concern I have is that I would like to try to use LOTW, and I
>> wonder if Jjradio will do that?
>>
>> One thing at a time.
>>
>>
>>
>> The other thing I am excited about, is that a Begalli paddle is coming to
>> live at my house.
>>
>> I can't wait!!!!
>>
>>
>>
>>
>>
>> Howard Kaufman MSW LCSW
>>
>>
>>
>>
>>
|