Hi Group,
Kelly and others have discussed the old venerable HTX-202 Radio Shack
Handheld radio, so here is a quick reference guide. I am pasting the
text of a file I created decades ago for the Radio Shack HTS-202
handheld radio below.
When you see the references for F followed by a dash and another key,
the F stands for the function key.
Unless otherwise stated, the F key should be held down first and the
second key that follows the dash should then be pressed.
HTX202 QUICK REFERENCE
1. call channel: press A
2. priority memory: press B
3. standard memory: press C
4. VFO: press D
5. lower frequency or memory channel: press *
6. higher frequency or memory channel: press #
7. Scan VFO or memory bank: press and hold * or # key
8. CTCSS or tone squelch on or off: press F-1
9. auto-dial program mode: press F-2 hold until double beep
10. off-set: press F-3 (order is 0 + -)
11. beep on or of: press F-5
12. reverse: press F-6
13. menu: press F-8
14. memory channel lock and unlock: press F-9( also called memory clear)
15. illuminate screen: press F-back light
16. enter frequency into VFO: press last digit to left of and first
three digits to right of decimal
17. directly access memory channel: press memory bank key, press number
sequence to access channel
18. enter frequency into memory: press D, enter frequency, set
parameters, press memory bank key,select memory channel, press D, press
F-C and hold until double beep, press PTT
19. enter frequency into call channel: press D, enter frequency, set
parameters, press A, press F-C and hold until double beep, press PTT
20. Auto-dial programming: press F-2 wait for double beep, press D,
press memory channel to be programmed (1-5), enter phone number and or
access code, press PTT
21. Auto-dial speed change: press and hold PTT, press D, press 0
22. set off-set: press F-8, set frequency with tuner, press PTT
23. set CTCSS: press F-8, press *, use tuner to select frequency, press PTT
24. Set tone squelch: press F-8, press * twice, use tuner to set
frequency, press PTT
25. Set tuning step: press F-8, press * three times, use tuner to set
frequency, press PTT
26. Set band scan limits: press F-8, press * 6 times, set lower
frequency limit, press * once, set upper frequency limit, press PTT
27. Set priority function: press F-B, to turn function off press bank
key or call channel key or turn unit off and on.
--
Signature:
They ask me if I'm Happy, I say "yes."
They ask me "How happy are you?"
I say: "I'm as happy as a stowaway chimpanzee on a banana boat!"
---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com
|