Subject: | |
From: | |
Reply To: | |
Date: | Sat, 10 Jan 2015 10:48:55 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello Howard, Stan and I have been working with Tom and Jay to come up with
the proper separation and for the design of the stack match. Jay will also
build the high-power balun as well.
N7MIT
Alan R. Downing
Phoenix, AZ
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Howard, W A 9 Y B W
Sent: Saturday, January 10, 2015 10:32 AM
To: [log in to unmask]
Subject: Re: Our 80 meter yagis
Alan,
I own two Optibeam antennas and they are a quality product made in Germany.
I met Tom, the owner of Optibeam twice at the Dayton Hamvention. As you
probably know, Array Solutions is the U.S. distributor of Optibeam products.
Tom's design is easy to assemble and after the elements were identified for
me, I was able to assemble about 90 percent of the antenna without sighted
help. The assembly is straight forward.
Howard #3, W A 9 Y B W
----- Original Message -----
From: "Alan R. Downing" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, January 10, 2015 9:15 AM
Subject: Our 80 meter yagis
> Good morning all, Here are a few numbers on the 2 element 80 meter
> OptiBeams that will be mounted on a rotating 200 foot Rohn 55G tower. The
> yagis will be mounted at 93 and 200 feet. The yagis weigh approximately
> 250
> pounds each, and have a boom length of about 34 feet, and a turning radius
> of about 42 feet. They have a wind loading of 20 SQ. Ft.
>
> I am giving you rough numbers because the factory specs are given in
> metric
> measurements. We also have a used 2 element 80 meter OptiBeam that will
> be
> cut down for use as a 60 meter yagi which will be mounted on a separate 89
> foot motorized crankup.
>
>
>
> Hope these figures are helpful.
>
>
>
> N7MIT
>
>
>
>
>
>
>
> Alan R. Downing
>
> Phoenix, AZ
>
>
---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com
|
|
|