Just did the update late last night, and while I haven't  done much with 
the radio thus far, I do like the easy split setup.   Tune to the DX 
station's frequency, hold in the split button while  hitting a number on 
the keypad corresponding to the  split you want.   If you hit "5" for 
example, the RX VFO will  be up 5 and the voice will say "TX 5 kilohertz 
up".  I also understand that a leading zero will put the split down: 
entering  0 5 will put the RX VFO down 5.

73, Steve KW3A

On 2/4/2015 8:56 AM, Bob Tinney wrote:
> Hi,
>
> There are several things that I like about the 2.0 update.  First, the
> drive button now speaks.  The VGS1 does not know the word drive, so the
> button says D on, and D off, but that's good enough for me.
>
> Buttons now speak in transmit mode.
>
> There are more volume settings for the VGS1.
>
> The receiver seems quieter but the signals are just as loud as before.
>
> One more thing, on the TS-590 list, someone mentioned that after
> upgrading that menu 60 was set to on, that was not true in my case, but
> you might want to check that.  Menu 60 is the transmit inhibit menu item.
>