Matt,
Although you can buy direct from MFJ, I don't think too many people do
that. They charge full retail price plus shipping. Most of the
dealers offer a discounted price and free or discounted shipping. I
usually deal with HRO since I can get items next day from the store in
Delaware, plus free shipping on orders over $100.
Others to check: Universal Radio, R and L, Giga parts, DX Engineering,
AES, to name a few. We are getting close to Dayton and sometimes
dealers offer a Dayton discount on some items. Don't know who may be
offering what, but it will pay to shop around for best price and best
shipping combo.
Having said all that, I did get my tuner from R and L in 2008. I was
concerned about MFJ QC, and this unit was a demo. I figured any
problems would have been worked out on this one, it came with full
warranty and a steep price discount. I wouldn't usually have done a
demo unit, but it all has worked out fine.
73, Steve KW3A
On 5/5/2015 8:17 AM, Matthew Chao wrote:
> Hi, Steve. Where did you buy your tuner: from HRO or MFJ
> directly? If you bought from MFJ, how was the purchasing experience;
> put another way, how helpful were they? And what about tech. support
> after installation? Thanks.--Matt, N1IBB.
>
> At 08:22 PM 5/4/2015 -0400, you wrote:
>> Yes the 993 will do this. I think all the MFJ auto tuners can
>> interface with the Kenwood's, including the 998 that I use. I think
>> the only LDG auto tuner that interfaces with Kenwood is the one Richard
>> mentioned the other day, rated at 125 watts or so. Some on the list
>> use other higher powerLDG autotuners that don't interface with the
>> Kenwood's in the same way, but can still be used with an extra button
>> press or two.
>>
>> 73, Steve KW3A
>>
>> On 5/4/2015 7:55 PM, Matthew Chao wrote:
>>> Wow! That's pretty slick. Which MFJ model is this, the 993B?--Matt.
>>>
>>> At 06:04 PM 5/4/2015 -0400, you wrote:
>>>> Matt,
>>>>
>>>> If you go this route, be sure to get the optional Kenwood cable. It
>>>> connects between the tuner and the 6 pin molex on the rear of the 480.
>>>> When connected, the internal tuner is disabled, and when you press
>>>> the tune button on the radio, the radio drops to low power cw and the
>>>> external tuner tunes. When a match is found the radio returns to the
>>>> original mode and power levels.
>>>>
>>>>
>>>> While some low power tuners can draw it's needed 12 vdc from the molex
>>>> connection to the radio, I think this one has too much current draw and
>>>> you will need an optional 1 amp wall wart, or power the tuner from the
>>>> station's main power supply.
>>>>
>>>> Good luck, Steve KW3A
>>>>
>>>>
>>>> On 5/4/2015 5:38 PM, Matthew Chao wrote:
>>>>> Hi, Tom. Going with MFJ based on your info is a deal
>>>>> maker. Probably the 993B, since I'm not running anything over 100
>>>>> watts for now or in the near future.--Matt, N1IBB.
>>>>>
>>>>> At 08:53 PM 5/3/2015 -0400, you wrote:
>>>>>> Matt:
>>>>>>
>>>>>> To add to what Ron has said, I just recently purchased an MFJ
>>>> 998 high-power
>>>>>> auto-tuner, and like it very much.
>>>>>>
>>>>>> By high power, I mean it will work with up to 1500 watts,
>> which is what I
>>>>>> needed since I use an ALS600 amplifier here. Actually the amp puts out
>>>>>> roughly 500 watts, so it is well within the acceptable
>> operating range for
>>>>>> the tuner.
>>>>>>
>>>>>> A few of us on the list use the MFJ 998, and, although it isn't totally
>>>>>> accessible since the menus don't talk, there are enough beeps and other
>>>>>> indicators to allow the basic functions to be quite manageable.
>>>>>>
>>>>>> I think the only thing I needed sighted assistance for was when I had to
>>>>>> tell the tuner to recognize my TS590 via the Kenwood interface.
>>>>>>
>>>>>> As for price, I bought mine from Ham Radio Outlet this past
>>>> March for $569.
>>>>>>
>>>>>> If you will only be operating 100 watts with your TS480, I
>> know there are
>>>>>> cheaper models by MFJ and LDG to meet that requirement.
>>>>>>
>>>>>> One other thing you might want to think about is that, as far as I
>>>>>> understand, LDG tuners can't directly be interfaced with
>> Kenwood rigs like
>>>>>> the TS480 and TS590. The MFJ models do interface well with
>> Kenwood rigs,
>>>>>> via the 5114K interface cable, and this was one of the main
>> selling points
>>>>>> for the MFJ over the LDG, as far as I was concerned.
>>>>>>
>>>>>> Tom Behler: KB8TYJ
>>>>>>
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: For blind ham radio operators
>> [mailto:[log in to unmask]]
>>>>>> On Behalf Of Dr. Ronald E. Milliman
>>>>>> Sent: Sunday, May 03, 2015 1:10 PM
>>>>>> To: [log in to unmask]
>>>>>> Subject: Re: Question about Auto Antenna Tuners
>>>>>>
>>>>>> The Palstar is an excellent external automatic antenna tuner, but it is
>>>>>> quite pricy for many people. As less expensive alternatives,
>> both MFJ and
>>>>>> LDG also sell excellent external automatic antenna tuners that are very
>>>>>> accessible. At least two of us have LDG tuners and Tom has one
>> of the MFJ
>>>>>> tuners, and as far as I know, we all like our tuners quite well.
>>>>>
>>>>>
>>>>>
>>>
>>>
>>>
>
>
>
|