Subject: | |
From: | |
Reply To: | |
Date: | Thu, 12 Mar 2015 23:13:06 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
60W is enough drive to get 550-600W from the amp. Use the ALC. Just ask assistance to adjust it once. The ALC is there to make sure you'll not overdrive the amp. You can for example set the ALC to limit your radio to max 60W. It means if you turn up your radio to 100 or 200W then the ALC will limit yuor power to 60W when turn on the amp. It's a good way to make sure never to damage the amp if you forgot to turn down the power on the radio.
OZ0TE Jacob
Skype-ID: Jacob-DK
> On 12/03/2015 at 19.46 Tom Behler <[log in to unmask]> wrote:
>
> Hi, everyone.
>
>
>
> I have been working with Dave (W7OQ), and Ron (K8HSY), who have been very
> patiently answering my various questions on the ALS600, but I thought I'd
> bring a few of my questions to the list, for anyone who might be inclined
> to respond.
>
>
>
> 1. What amount of power does anyone use to drive their ALS600? And, does
> this vary by dand? I asked Ameritron Tech Support this question today, and
> didn't get a clear answer. I got a sort of "it depends" kind of response.
>
>
>
> And
>
>
>
> 2. I am getting the impression that most of us who use the ALS600 do not
> use the ALC function. It seems like the consensus is that with a modern-day
> 100-watt rig, this should not be necessary. Am I correct in this
> interpretation??
>
>
>
> Thanks, and 73 from Tom Behler: KB8TYJ
>
>
|
|
|