Subject: | |
From: | |
Reply To: | |
Date: | Thu, 18 Dec 2014 10:02:26 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Just my thoughts.
First of all, the polarization of your antenna makes a 20 DB difference in
signal strength for local contacts.
2. FM is usually Vertical and the other modes are horizontal.
When using propagation for distance, the polarization of your antenna isn't
as critical.
50 to 50.1 is CW with beacons around 50.040.
The USB calling frequency is 50.125.
A.M. calling frequency is 50.4.
Power limit is the same as HF limits.
Others can add more, I am sure.
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Richard B McDonald
Sent: Thursday, December 18, 2014 9:03
To: [log in to unmask]
Subject: 50 - 52 MHZ vs. 53 - 54 MHZ Portions of the 6M Band
Hi!
I am trying to get a general understanding of the typical operating
practices that occur along the upper and lower portions of the 6M Band. As
I understand it, the lower portion of the band (50 - 52 MHZ) is typically
used for "weak signal UHF DX" on USB. On the other hand, the upper portion
of the band (52 - 54 MHZ) is typically used for local FM operations; often
via repeaters. Is this generally correct? When operating within these
different portions of the band, are there any tips or tricks I ought to
know. Are there any beacons that I can try to tune-in to check propagation
conditions?
BTW, I am using a Kenwood TS-2000 with a 6M J-Pole tuned to 52 MHZ mounted
atop a 30 foot mast.
73,
Richard KK6MRH
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.5577 / Virus Database: 4235/8757 - Release Date: 12/18/14
|
|
|