Steve, I didn't remember that we discussed this exact issue, but we may
have. Actually, right now, I have one of my mic programmable buttons
available that I can program. I followed your recommendations and set-up for
two of my other programmable buttons, and they work just fine, very helpful.
Ron, K8HSY
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Steve Forst
Sent: Sunday, November 16, 2014 12:08 PM
To: [log in to unmask]
Subject: Re: Setting carrier level on the 590?
Ron,
I think we may have discussed this earlier, but I don't think there is
any way to do this. I think your only other options are to get other
pf keys, either with a home brew box, a mic with extra pf keys, or a mic
with up/down buttons that can be reassigned as pf keys.
As far as I know, the TX tune function you are using has no front panel
button, it can only be done with a pf key.
73, Steve KW3A
On 11/16/2014 10:04 AM, Dr. Ronald E. Milliman]\\` wrote:
> Steve, do you know if you have your PF1 key to the left of the power
> button, set the way you have yours, can you also have this same key
> set to activate the tune function? Right now, I have that key
> programmed so that when I depress it, the 590 goes into tune function,
> decreasing the power down to around 10 watts and allowing me to tune
> my automatic antenna tuner for minimum SWR. I use it all of the time
> for this purpose. Do you know if I can keep it programmed to use this
> way, but then, also program it to work the way you use yours when in
transmit??
>
> Ron, K8HSY
>
>
>
|