Matt, interesting you ask this. Bob and Tony were here last night and we were working with the TMV71a and had an issue on the B receiver. We got the freq in correctly and I think the Pl as well but couldn't figure out how to set it to a negative offset. Is that the same issue you have?
Frank
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]] On Behalf Of Matthew Chao
Sent: Wednesday, July 29, 2015 2:11 PM
To: [log in to unmask]
Subject: Re: BMV71A, question?
Yes, my bad. TMV71A. How do I change the repeater offset for one of my channels? Thanks.--Matt, N1IBB.
At 09:54 AM 7/29/2015 -0700, you wrote:
>Hi and thanks Doug. Will be running around today, not on the air,
>probably get on the swap net tomorrow evening. 73, Jim
>
> ----- Original Message -----
>From: doug and sheilla emerson <[log in to unmask]
>To: [log in to unmask]
>Date sent: Wed, 29 Jul 2015 09:25:28 -0700
>Subject: Re: BMV71A, question?
>
>Jim, sorry I missed you yesterday on 147.195. I just checked out my t
>m v
>71 A. Menu 100 allows you to set low and high scanning peramaters.
>Menu 101 allows you to set frequency steps for your v f o. With
>reguard to Matt's question, I don't know how to set an odd repeayter
>offset.
>However, a few
>weeks back, someone on the list posted that information. Perhaps that
>someone will do it again. hth. 73. Doug, N6NFF
>
>-----Original Message-----
>From: Jim Gammon
>Sent: Tuesday, July 28, 2015 3:59 PM
>To: [log in to unmask]
>Subject: Re: BMV71A, question?
>
>Doug, I'm curious, what do those menu selections do for the rig?
>I am listening to 147.195 if you want to call me there, Jim WA6EKS
>
>----- Original Message -----
>From: doug and sheilla emerson <[log in to unmask]
>To: [log in to unmask]
>Date sent: Tue, 28 Jul 2015 15:26:37 -0700
>Subject: Re: BMV71A, question?
>
>Curtis, in order for your t m v 71 A to see menus 100 and 101, your
>radio must be in the v f o mode, not the m r memory recall mode. Push
>the button in the uupper left hand corner of the radio. If you hear
>the voice say v f o, you're good to go. You will then see menus 100
>and 101. h t h. Doug, N6NFF
>
>-----Original Message-----
>From: Curtis Delzer
>Sent: Tuesday, July 28, 2015 1:54 PM
>To: [log in to unmask]
>Subject: BMV71A, question?
>
>Hi all! I have the radio, but seems there is no menu 100 or 101.
>One of
>them is "programmable vfo" and the other is "step size."
>Why are my two menus missing?
>THANKS! I am creating a braille copy of the menu system with comments
>as to how to program memory channel names using the microphone, all put
>together in one place and it should be available soon!
>
>-----
>Curtis Delzer, HS.
>K6VFO
>San Bernardino, CA
|