Hi Kent,

No, I'm  a cheapskate.  I got mine from NA4RR.  On the other hand, Jim 
KY2D has more money to spend, and he got his from K4KIO.  Mine seems to 
have survived a pretty rough winter and I've been pleased with the 
purchase.

Of course there are other ones out there, so do your research and good 
luck if you go this route.

73, Steve KW3A

On 3/11/2015 8:12 PM, Kent Plemmons wrote:
> Hi Steve,
>
> Is your hex beam from K4KIO?
>
> Thanks,
> Kent Plemmons
> KK4FFF, Clyde NC
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Steve Forst
> Sent: Sunday, March 08, 2015 3:51 PM
> To: [log in to unmask]
> Subject: Re: Hex Beam
>
> Mine is 21.6 feet diameter.  It's got 6 spreaders coming out from the
> center, so it is as wide as it is long.
>
> Turning radius is 10.8 feet.
>
> height from base to top of  center post is 39 inches.   That may or not
> include the couple of    inches for the mounting thing below the base
> and the eye bolt at top of the center post.  either way, it's the better
> part of 4 feet in height.
>
> Since this thing looks like an upside down umbrella, the widest  part is at
> the top, although it's not  much more narrow at the bottom.  Hope that makes
> some sense.
>
> 73, Steve KW3A
>
> On 3/8/2015 3:22 PM, Dr. Ronald E. Milliman]\\` wrote:
>> Can someone here give me the various dimensions for your hex beam, e.g.
>> height from bottom to top, maximum width at the top, etc.
>>
>>
>>
>> TNX, 73,
>>
>> Ron, K8HSY
>>
>>
>>
>
>
>