BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Don Breda <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Sat, 31 Jan 2015 13:24:56 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (66 lines)
Wow! the ldg has no beeps at all so telling whether autotune is on or 
off can be problematic as well as telling whether it is in 
semi-automatic or full tune mode.

This may be because my tuner may have problmes.

Having the beeps though is really nice.

Wondering what you needed sighted help to set up in the first place.

 From your description you should have been able to use it right out of 
the box.

Don


On 1/31/2015 12:52 PM, Steve Forst wrote:
> Don,
>
> I don't know anything about the LDG tuner (and very little about the
> MFJ), but here goes:
>
> If you can't see the display, I'm not sure of a simple way to tell what
> mode you are in.     I assume that by "mode" you mean  either automatic,
> or semi-automatic.   As you hit the 2 buttons to switch between modes,
> you will get a single beep for  automatic, and 2 beeps for
> semi-automatic.    I usually leave it at semi-automatic, so not an issue
> for me.
>
> For what it's worth, the menu's wrap around  and unless you remember
> where you left off, you won't know where you are.      I  set mine up in
> 2008 with sighted help and never had to go back.
>
> There are CW alerts for too much power for tuning, too little power for
> tuning, and too much power for the tuner to handle.   Also a crude
> system of beeps  for reading SWR (that I don't use).
>
> There are beeps to tell which memory bank is active and which antenna
> port is activated.
>
> All of the above is for an 8 year old MFJ 998.    Perhaps some
> differences in  other models, or later versions of this one.
>
> 73, Steve KW3A
>
> On 1/31/2015 11:36 AM, Don Breda wrote:
>>        I have an ldg at1000pro tuner at the moment.
>>
>> It is used and may have some problems in which case I will be returning
>> it to the buyer.
>>
>> Before I put out the money for a brand new one I was wondering if it is
>> easier to tell the status for the different modes etc. with the mfj line
>> of auto tuners then it is with the ldg tuners?
>>
>> Any thoughts appreciated.
>>
>> Thanks in advance.
>>
>> w a 2 i w c
>>
>> Don
>>
>>
>>

ATOM RSS1 RSS2