Yes, that's what I bought. They are sonically welded together and match the
"red right, tab top" standard that everyone is using for ARES / RACES. The
advantage is that we don't need sighted help. The colors are always correct.
73, Jim, KY2D
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Steve Forst
Sent: Friday, June 06, 2014 3:24 PM
To: [log in to unmask]
Subject: Re: Anderson Power Pole Dumb Question
Kent,
Different Steve here. I was going to mention this, but you beat me to
it. I think it was Jim KY2D on one of our 40 meter things a couple of
weeks ago who mentioned he had gotten some of them pre assembled.
Sonicly welded or something. It does take a few steps out of the process in
not having to identify the red and black halves and putting them together
properly.
I think I have enough of the loose ones to last a lifetime, but would
probably go that route if I were starting from scratch.
73, Steve KW3A
On 6/6/2014 3:06 PM, Kent Plemmons wrote:
> Hi Steve,
>
> You can also get Anderson PowerPoles already assembled. You just have
> to crimp the connectors onto your wires and insert them. This would
> save sorting out which half is which. They cost just a bit mnore but
> may be useful to you or others on the list.
>
> I got mine at QuickSilver Radio. John is the owner, located somewhere
> in the northeast.
> Http://qsradio.com
>
> Kent Plemmons, KK4FFF
> Clyde, NC
>
> -----Original Message-----
> From: For blind ham radio operators
> [mailto:[log in to unmask]]
> On Behalf Of Steve Dresser
> Sent: Thursday, June 05, 2014 9:10 PM
> To: [log in to unmask]
> Subject: Re: Anderson Power Pole Dumb Question
>
> Howard,
>
> Your explanation has given me a pretty clear picture of what an
> Anderson Power Pole looks like, as well as how it works. I've been
> wondering for a long time whether I should get some of these things,
> and your very lucid explanation has convinced me that I should.
> Thanks for sharing with the list.
>
> Steve
>
> ----- Original Message -----
> From: "Howard, W A 9 Y B W" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Thursday, June 05, 2014 20:57
> Subject: Re: Anderson Power Pole Dumb Question
>
>
>> Dave,
>>
>> Take a look at one of the plastic housings. One end is a little
>> smaller than the other end. On the smaller end, there is a rectangle
>> hole that is off center.
>> Now, take another plastic housing and slide one small end in to the
>> other small end.
>> Since the rectangular hole is off center, one wall is thicker than
>> the other side. Orient one of the housings so that the thicker wall
>> slides in to the hole in the other housing. Do this without having
>> installed the terminal in to the housings. They will slide together
>> very easily and will probably fall apart if you point one down toward
>> the tabletop.
>>
>> Now look at the larger end of the housings. The hole in this end is
>> almost round.
>>
>> This is the end from which you insert the terminal after it is
>> crimped on to the wire.
>>
>> Now look at the larger ends. On two of the sides there is a groove
>> and on the other two sides are a raised portion that will slide in to
>> the groove on another housing. You must slide two of these housings
>> together side-by-side to make a single two part housing. If you
>> don't do this, you will not maintain the proper polarity and you will
>> not know which one is red or which one is black.
>>
>> To slide the housings together, put them side-by-side so that a
>> raised part is next to a groove. Slide the raised part on one in to
>> the groove on the other placing the end of the raised part in to the
>> groove from the end with the rounded hole, or the larger end.
>> Continue pushing them together until they are fully locked and
>> side-by-side. They are hard to slide together and harder to get
>> apart.
>>
>> When you put two of these together, you use one black and one red.
>> You will insert the terminal on the red or positive wire in to the
>> red housing and the terminal on the black or negative wire in to the
>> black terminal.
>>
>> You will do this two housing thing on the power leads on your radio
>> and also on the power leads from your power supply. Now you simply
>> push the two pairs together and the polarity is always correct if you
>> put the positive wires in to red housings and negative wires in to
>> black housings.
>>
>> I know this is confusing, just examine the housings and it will make
>> since.
>>
>>
>> If you still are having trouble, I will give you my phone number and
>> I will talk you through it.
>>
>> Howard #3
>>
>> ---- Original Message -----
>> From: "Dave Basden" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Thursday, June 05, 2014 5:56 PM
>> Subject: Re: Anderson Power Pole Dumb Question
>>
>>
>>> Hi Howard,
>>>
>>> All right, I am back where I started, I guess. When I looked at the
>>> plastic housing that the metal tabs go into, my first impression was
>>> that the plastic housing was actually in two parts that separated so
>>> that different things could be connected together. Neither I nor my
>>> sighted XYL see a way to separte the housing into two pieces though.
>>> We watched both the video and tutorial on the Anderson website and
>>> apparently are missing some essential point. What comes apart when
>>> you want to disconnect one device and connect another? Sorry to be
>>> so dense.
>>>
>>> 73,
>>>
>>> Dave, W7OQ
>>>
>>> At 03:50 PM 6/5/2014, you wrote:
>>>> Dave,
>>>>
>>>> Normally you would not remove the terminal from the plastic housing
>>>> unless you made an error in assembly such as using the wrong color
>>>> housing or you didn't crimp the terminal on the wire securely.
>>>>
>>>> The side of the terminal that goes against the plastic housing has
>>>> a little barb sticking out that holds it in to the housing. If you
>>>> insert a small screwdriver between the housing and the terminal and
>>>> raise it up a little, you should be able to pull it out while you
>>>> are gently lifting it up.
>>>>
>>>> Howard #3
>>>>
>>>> ----- Original Message -----
>>>> From: "Dave Basden" <[log in to unmask]>
>>>> To: <[log in to unmask]>
>>>> Sent: Thursday, June 05, 2014 5:11 PM
>>>> Subject: Anderson Power Pole Dumb Question
>>>>
>>>>
>>>>> I'm a rank beginner when it comes to Anderson power poles. I
>>>>> think I understand that the small metal connectors are crimped or
>>>>> soldered to the cable and then inserted into the plastic housing.
>>>>> It snaps in, but how is it removed. Surely I don't just pull hard
>>>>> and hope the crimped or soldered connection holds. The advantage
>>>>> is supposed to be ease of connecting and disconnecting from power
>>>>> supplies and devices, so they must come apart. Sorry to sound so
>>>>> ..., but I guess I am!
>>>>>
>>>>> 73,
>>>>>
>>>>> Dave, W7OQ
>>>>
>>>>
>>>>
>>>> ---
>>>> This email is free from viruses and malware because avast!
>>>> Antivirus protection is active.
>>>> http://www.avast.com
>>
>>
>>
>> ---
>> This email is free from viruses and malware because avast! Antivirus
>> protection is active.
>> http://www.avast.com
>>
>
>
>
|