Subject: | |
From: | |
Reply To: | |
Date: | Sun, 27 Apr 2014 19:05:23 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Thanks, Steve.
This is exactly what I need.
Tom Behler: KB8TYJ
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Steve Forst
Sent: Sunday, April 27, 2014 7:02 PM
To: [log in to unmask]
Subject: Re: TS480 Current Draw
Tom,
According to the text manual I have, current draw on TX is a max of
20.5 amps for the 100 watt version and 41 amps for the 200 watt version.
Draw on RX is 1.5 amps or less (no signal).
73, Steve KW3A
On 4/27/2014 6:51 PM, Tom Behler wrote:
> Hi, all.
>
>
>
> I am going to be re-vamping my ham radio setup out at the RV this
> summer, and was wondering if someone happens to know the amperage
> power draw for the TS480.
>
>
>
> I'm looking for the non-transmit amperage, plus the maximum amperage
> if transmitting in CW or RTTY mode at 100 watts.
>
>
>
> For some reason, the text version of the manual that I have only gives
> me a partial list of specifications, and current draw is not one of them.
>
>
>
> I can obviously approximate, but the actual figures would be preferred.
>
>
>
> I'm trying to figure out the best power supply arrangement to have out
> at the camp site.
>
>
>
> I'll also be using a TMV71A for VHF and UHF, and am trying to see if
> one of my power supplies will be enough to power both rigs. This
> assumes, of course, that I'll not be transmitting with both the TS480
> and TMV71A simultaneously.
>
>
>
> Tom Behler: KB8TYJ
>
>
>
>
>
|
|
|