Thanks Jim


-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Jim Kutsch, KY2D
Sent: Friday, May 30, 2014 7:21 AM
To: [log in to unmask]
Subject: Re: ACLOG - DX Spotting

John,
To change what spots you get, you have to login to the cluster by telnet and
set filters. An overview can be found at:
http://dxspots.com/

Here's a helpful list of all the various telnet commands to the DX cluster.
The show or set filter is the part you need. At the bottom of this web page,
there's a whole section on setting filters. It was what I used to turn off
2M, 6M, and 160M spots when I started using the spotting feature in ACLog.
http://bcdxc.org/ve7cc/ccc/CCC_Commands.htm

73, Jim, KY2D



-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of John Vernaleken
Sent: Thursday, May 29, 2014 10:18 AM
To: [log in to unmask]
Subject: ACLOG - DX Spotting

Hello All

I am using DXSPOTS.COM in AC Log. How can I set a filter not to allow 6
Meter spots since I am not using 6.

John  KC2QJB