BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Dr. Ronald E. Milliman" <[log in to unmask]>
Reply To:
Date:
Sat, 29 Mar 2014 18:07:13 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (64 lines)
Thanks, Howard, for the info re Anderson Power Poles. I've used a variety of
power connectors over the years, but never the Anderson Power Poles. I've
mostly used the trailer type connectors that have to be mated, male to
female, and I really like them and never had any trouble with them. However,
I am always open to trying something different; so, I'll give the Anderson
Power Pole system a try.

Ron, K8HSY
 


-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Howard, W A 9 Y B W
Sent: Saturday, March 29, 2014 4:28 PM
To: [log in to unmask]
Subject: Re: Anderson Power Pole

Ron,

West Mountain Radio is a good source for Anderson Powerpole products.

West Mountain sells various distribution boxes that use the Powerpoles. 
These boxes come with 5 to 12 powerpole connections so that you can connect
all of your stations 12 volt equipment to one power supply.  Each of the
powerpole connectors is fused with an easy to change and obtain automotive
type fuse.

The powerpole system consists of two plastic housings, one is red and the
other is black in color.  There are metal contacts that you attach to your
power leads of your various pieces of equipment that then snap in to the
plastic housings.  These contacts come in three sizes, up to 15 amps, up to
30 amps and up to 45 amps.

The 15 amp contacts accept number 20 - 16 gauge wire the 30 amp contacts
accept 16 - 12 gauge wire the 45 amp contacts accept 14 - 10 gauge wire.

The contacts are crimped on to the wires with a specific crimping tool.

The plastic housings are made so that they snap, actually slide together so
they make a solid rigid two connector plug.

The housings and contacts are designed so that you do not have a male and
female connector.  It is kind of hard to describe how they work but two of
the same connectors can be connected together.

They are actually keyed so that you can not connect them backwards.

A 12 pair pack, consisting  of 24 contacts, 12 red and 12 black housings
costs $13 for the 15 and 30 amp versions and $18 for the 45 amp versions. 
Packs of 100 pairs cost $80 and $120 respectively.

Hope this helps.

Howard #3




---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com

ATOM RSS1 RSS2