Hello Kelvin,
I heard you on the 20 meter net last Sunday afternoon with a good 5-8 
signal.
I am just wondering if you were able to copy me at all?
I know that was about a week ago but perhaps you may remember.
Thank you!
Lowell  W8QIY
----- Original Message ----- 
From: "Kelvin Marsh" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, March 10, 2014 2:01 PM
Subject: Re: need to find a replacement radio


> Hi David,
>
> This certainly demonstrates the advantages of true integration!
>
> Best wishes, Kelvin Marsh - M0AID
>
> Working to improve accessibility for radio amateurs with disabilities
>
> www.active-elements.org
>
> For accessibility evaluations of amateur equipment and MP3 manuals
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of David W Wood
> Sent: 09 March 2014 23:28
> To: [log in to unmask]
> Subject: Re: need to find a replacement radio
>
> Kelvin
>
> As I stated
>
> There is a setting within the K3 menu whereby you can set the transmit
> output power for the K3 in bare foot mode, and when the KPA500 is put into
> "operate" the power of the K3 as a driver is then put into the "driver"
> mode.
> A very clever facility!
>
> Even more clever is that if the drive power or antenna match is poor, then
> the amplifier puts itself into a default mode.