Ok, I didn't change it but Menu 02 is set to on. Jim WA6EKS
----- Original Message -----
From: Steve Forst <[log in to unmask]
To: [log in to unmask]
Date sent: Tue, 20 May 2014 07:53:16 -0400
Subject: Re: Auto mode on the Ts-480?
Jim and Alan,
Try menu 002. Don't have my 480 hooked up now, so can't try it
myself,
but I think this may be what you want.
73, Steve KW3A
On 5/19/2014 10:07 PM, Alan R. Downing wrote:
Jim, I'd be interested in the answer to your question as well.
Which model of the 480 do you have? I bought my 480SAT from a
friend for
$400 who had bought it a year or so ago, and other than hooking
it up one
time, had never used it. I bought it specifically for use on
six meters
only. I drive my Commander legal limit amp, so the HX model
wouldn't have
done me any good. I am quite pleased with the radio, though I
have never
tried it on HF, and under heavy QRM. What is your opinion of
the rig?
73
Alan R. Downing
Phoenix, AZ
-----Original Message-----
From: For blind ham radio operators
[mailto:[log in to unmask]]
On Behalf Of Jim Gammon
Sent: Monday, May 19, 2014 6:45 PM
To: [log in to unmask]
Subject: Auto mode on the Ts-480?
Does anyone know which menu number is auto mode on the TS-480?
Jim WA6EKS
----- Original Message -----
From: Dave Basden <[log in to unmask]
To: [log in to unmask]
Date sent: Mon, 19 May 2014 18:11:06 -0700
Subject: Re: TS-590 Default Mode
Hi Jim,
That did the trick! I guess I assumed that auto mode meant it
would
automatically switch mode depending on the frequency. I'll have
to
read the manual section and find out exactly what auto mode does
automatically.
Thanks and 73,
Dave, W7OQ
At 03:07 PM 5/19/2014, you wrote:
Dave, looks like you've turned on auto mode, menu 23. It'll
likely clear up
if you turn that off. It's discussed in the manual, page 51.
-----Original Message-----
From: Dave Basden
Sent: Monday, May 19, 2014 3:49 PM
To: [log in to unmask]
Subject: TS-590 Default Mode
When I first received my TS-590, I think it defaulted to CW mode
when
I entered a frequency in the CW portion of a band. Now it seems
to
default SSB mode when I key in a frequency regardless of where I
am
going to in the band. I've been through the menus and can't
seem
to
find a relevant setting. Do any of you who have owned the
TS-590
for
a while have any idea what I might have changed? I'm assuming
something did change and it isn't just my failing memory! I'm
about
98% CW, so it is a minor annoyance to have to change mode
whenever I
key in a CW frequency.
73,
Dave, W7OQ
|