For 150 grand + the cost of permits, taxes, permit fees and installation you
can have one just like it.
73
Alan R. Downing
Phoenix, AZ
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Mike Barnard
Sent: Friday, March 14, 2014 6:29 AM
To: [log in to unmask]
Subject: Re: What a tower!
Anyone have a sure shot at the lotery!!!
What a station, I can't immagine it.
Mike
KD2CDUAt 11:19 PM 3/13/2014, you wrote:
>Jim, one amazing tidbit is that the tower goes from full retraction (43
>feet), to full extension (170 feet), in 29 seconds. Interestingly, because
>of slow ramp up and ramp down motor control, the antennas don't suffer any
>extreme stress.
>
>73
>
>
>Alan R. Downing
>Phoenix, AZ
>
>
>-----Original Message-----
>From: For blind ham radio operators [mailto:[log in to unmask]]
>On Behalf Of Jim Gammon
>Sent: Thursday, March 13, 2014 7:40 PM
>To: [log in to unmask]
>Subject: What a tower!
>
>Man, I need some friends like that! Bet you could just put your
>shack atop that tower thus running very short coaxes to the
>antennas. What a "treehouse!" Jim WA6EKS
>
> ----- Original Message -----
>From: "Alan R. Downing" <[log in to unmask]
>To: [log in to unmask]
>Date sent: Thu, 13 Mar 2014 19:34:03 -0700
>Subject: Re: dayton
>
>At Dayton, be sure to check out the 170 foot Luso tower that a
>good friend
>of mine bought. It will be on display at Dayton, then
>immediately trucked
>to my friend's QTH where the base will be waiting for it; all 52
>cubic yards
>of 4000 PSI concrete. The rotating substructure will also be
>installed on
>the concrete base, and ready for the crane to lower the tower
>onto it. The
>tower weighs in at 50,000 pounds.
>
>Alan/KD7GC
>
>
>[*]
|