It just seems most natural to me to use the CWR mode. I believe my TS-930
tuned that way, and when tuning up the band, I like to tune low to high
pitch. Just my preference.
--
Jim, KE5AL
-----Original Message-----
From: Ed Malmgren
Sent: Monday, March 10, 2014 12:37 PM
To: [log in to unmask]
Subject: Re: Auto Zero Beat With Ts590
I can't think why having a choice would be such a mystry, some like copying
on upper and some like lower for C W so having this choice is a no
brainer. I used to use all Tem Tec gear and that was the about the only
reason I did not like the rig was because it give you one side and that is
all. Ed
-----Original Message-----
From: Kelvin Marsh
Sent: Monday, March 10, 2014 11:20 AM
To: [log in to unmask]
Subject: Re: Auto Zero Beat With Ts590
Hi Steve,
You're not alone. Not being an experienced CW op here, the CW reverse stuff
was a mystery to me too!
BTW, you were a 59 with great audio on the net!
Best wishes, Kelvin Marsh - M0AID
Working to improve accessibility for radio amateurs with disabilities
www.active-elements.org
For accessibility evaluations of amateur equipment and MP3 manuals
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Steve Forst
Sent: 09 March 2014 23:52
To: [log in to unmask]
Subject: Re: Auto Zero Beat With Ts590
Tom,
I heard you say on the 20 meter net that prior to this recent
discussion you were not aware of the cw auto tune in the 590. I think
you still have a 480 in the RV. You may or may not be aware that cw
auto tune is also on the 480. Just to the right of the number pad are 4
keys in a diamond pattern for setting NR, filters, etc. The bottom of
these 4 keys is the cw auto tune.
Thanks to posts from Lloyd, Ed, and Steve, I now have some idea of the
cw reverse stuff. Never had the slightest idea what it was there for.
73, Steve KW3A
On 3/9/2014 6:51 PM, Tom Behler wrote:
> Good point, Ed.
>
> I'll give that a try the next time I'm trying to work a pileup.
>
> Tom Behler: KB8TYJ
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Ed Malmgren
> Sent: Sunday, March 09, 2014 3:19 PM
> To: [log in to unmask]
> Subject: Re: Auto Zero Beat With Ts590
>
> It is good having a choice on C W if the pileup is above your listening Q
R
> G which is normally the case then you can listen on the other side of the
> signal to avoid hash from folks sending close to the D X station. Ed
>
> -----Original Message-----
> From: Tom Behler
> Sent: Sunday, March 09, 2014 12:32 PM
> To: [log in to unmask]
> Subject: Re: Auto Zero Beat With Ts590
>
> Steve:
>
> Considering all the CW operating I do, I guess I'm no expert on this
either,
> and have sure learned a lot today. As it turns out, my transmit and
> listening frequencies were never that far off, but the auto-zero-beat
> function allows me to be sure, which is a good thing.
>
> I guess one of the reasons for CW reverse is that you can doublecheck to
be
> absolutely sure you are zero-beat with the station you are working, as the
> article Danny sent out explains.
>
> There may be other reasons for using CW reverse, but I am not totally sure
> what they might be.
>
> Tom Behler: KB8TYJ
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Steve Forst
> Sent: Sunday, March 09, 2014 2:11 PM
> To: [log in to unmask]
> Subject: Re: Auto Zero Beat With Ts590
>
> Tom,
>
> I'm no cw guy, but use this feature all the time and have this function
> set to one of my extra pf keys for easier use. I don't recall the limits
> offhand, but both filter bandwidth and shift need to be below certain
> values i.e. if the filter is too wide or the pitch too high, the feature
> won't work.
>
> I think this feature was a 2 button press on the TS-2000, but only a
single
> press for the 590.
>
> I have to admit I never understood what the cw reverse was all about, but
> hopefully I'll learn something.
>
> 73, Steve KW3A
>
>
>
|