Thanks a bunh Jim. I had read about those keys in the user manual but I
guess I just wasn't focused enough to see the logial layout. I'm glad those
are there bedause I believe I'll probably re-map the PF keys on the
microphone and I'll need a way to move around in the menu.
Thank you very much,
Kent
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Jim Shaffer
Sent: Thursday, January 23, 2014 9:12 PM
To: [log in to unmask]
Subject: Re: TS-590S menus
Kent, you can use the keys to the right of the main tuning knob. If you
have the front panel layout, they're in rows 3 through 5 on the keypad to
the right of the main tuning knob. As you already know, you turn on memory
mode with the 5-3 key, row 5, column 3. You can go down and up with keys
4-1 and 4-2. Once you're at a menu, set the value with keys 3-2 and 5-2.
So those 4 keys, 3-2 on top, 4-1 and 4-2 in the middle, and 5-2 on the
bottom form a logical sort of cursor layout.
Let's say you enter menu mode and the vgs-1 says "menu 04 4". This means
you're at menu 04, and it's value is 4. Now press 4-2 a couple of times to
get up to menu 6. It might say something like "06 1". Now press 3-2 to
increase the value, and you'll hear "2", and the speech will get louder.
Press
5-2 to decrease the value. I keep mine at 1, the lowest level.
My rotary control only moves by 1 value, so I can use it to move one menu at
a time, but you don't need to if you use the 4-1 button to go back one, and
4-2 to go forward by 1.
hth
--
Jim KE5AL
-----Original Message-----
From: Kent Plemmons
Sent: Thursday, January 23, 2014 7:54 PM
To: [log in to unmask]
Subject: Re: TS-590S menus
Michael,
I cannot. I am about 260 miles west on the NC TN border.
Thank you, Kent
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Michael Thurman
Sent: Thursday, January 23, 2014 8:36 PM
To: [log in to unmask]
Subject: Re: TS-590S menus
can you reach any of the raleigh area repeaters? I don=92t know enough = of
the geography to know where eyou are in relation to me.
On Jan 23, 2014, at 7:45 PM, Kent Plemmons <[log in to unmask]> wrote:
> Hi List,=20
>=20
>=20
>=20
> I'm just learning about my TS590 and am having difficulty learning how
>=
to
> activate menus and selections within the TS590 menu system. =20
>=20
> I know how to activate the menu with the menu key and I know how to =
select
> menu A or B.=20
>=20
> When I press the menu button it says "menu 004". =20
>=20
> I can rotate the multi-channel control forward or backwards but it =
moves not
> to the next sequential menu number but it jumps forward or backward by
> =
about
> 10. I haven't found a way to move forward or backward sequentially by
> =
just
> 1 menu item within the menus other than by using the up/down buttons =
on the
> mike. When I use the mike buttons I can move forward or backward by a
> single menu item and the VGS1 says 5,6,7 etc. telling me which menu I
> =
am on.
> I can also move forward or backward within the menus by pressing the =
Q-M.IN
> or the Q-MR buttons to move forward or backward but not
> sequentially.=20=
>=20
> Once I do find the menu item that I want such as menu 006 I don't know
>=
how
> to activate it so that I can hear the selections available for the
>particular menu. =20
>=20
>=20
>=20
> I have read that the descriptions of the available items within each =
menu is
> displayed on the sub-menu but I haven't learned how to hear that. =
Does the
> VGS1 speak this information as I scroll through the selections and if
> =
it
> does, how do I make this happen?
>=20
>=20
>=20
> Thank you all for your assistance!
>=20
>=20
>=20
> Kent Plemmons
>=20
> Clyde NC KK4FFF
>=20
> Kent at reading products dot com
>=20
>=20
|