The easiest way to do that I would think besides a telephone pickup on the earpiece, which would work fine, is to get a Kenwood speakermic, most of those have an earphone jack that accepts a standard  plug. also radio shack has an adaptor that may work as well, if the plastic is small enough to fit, which should be fine. What are you trying to get front he radio? I have one as well, come on Skype and we can talk about it. i am sure i can help :)
On Dec 29, 2013, at 11:49 PM, Sarah k Alawami <[log in to unmask]> wrote:

> That works, but what do I use to connect my  radio to my board? I don't =
> have an 8th inch to what ever that smaller adapter is.
> On Dec 29, 2013, at 6:27 PM, Gary Tillinghast <[log in to unmask]> =
> wrote:
> 
>> Hi Sara,
>> Are you using the USB for audio or the area where the microphone jack =
> plugs=20
>> in?  If you are using the mic connection, you need to use the smaller =
> port=20
>> for audio out which is smaller than the 1/8 th.  Gary KB2YAA.
>> =20
>> -----Original Message-----=20
>> From: Sarah k Alawami
>> Sent: Sunday, December 29, 2013 8:38 PM
>> To: [log in to unmask]
>> Subject: Question about recording direct from my baofeng UV5R
>> =20
>> Hey to all. I was trying to record direct from my baofeng as I have a =
> =3D
>> mixing board with  tape in and out  both with RCA y cables and 8th =
> inch =3D
>> on the other end so I can hook them in to my computer or phone or what =
> =3D
>> not for demo purposes. I could not get my cables to work with my =3D
>> baofeng. What do I need to record direct from my baofeng to my board? =
> It =3D
>> is hooked to my computer so I'm not worried. I know how to run my =3D
>> software to capture what comes from my board via USB. I heard of your =
> =3D
>> site from Dave Marthouse by the way.  Take care and be blessed. and =3D
>> happy holidays.=3D
>> =20
>> =20
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2014.0.4259 / Virus Database: 3658/6959 - Release Date: =
> 12/29/13=20