You can get the same result with the Enter key.
Steve
----- Original Message -----
From: "Steve Forst" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, September 11, 2013 12:33
Subject: Re: Help with my TS-480
> Jim,
>
> If you want s meter, you would need to set the pf key (menu 48) to 62.
> Then you would have to do a kind of backhanded way to get freq, such
> as hitting menu key twice to get in and out of menu mode and have it
> read freq as it goes back to vfo mode. There may be other keys that
> will also do this, but I use the menu key.
>
> 73, glad it works, Steve KW3A
>
>
> On 9/11/2013 12:25 PM, Jim Gammon wrote:
>> Thanks again Steve, I'll try Menu 62 because I'd like to be able
>> and retrieve s meter readings by just hitting a key twice. Jim
>> WA6EKS
>>
>> ----- Original Message -----
>> From: Steve Forst <[log in to unmask]
>> To: [log in to unmask]
>> Date sent: Wed, 11 Sep 2013 09:34:57 -0400
>> Subject: Re: Help with my TS-480
>>
>> Oops, meant to say set menu 48 to either 61 or 62. 61 will read
>> vfo,
>> 62 will read s meter. Setting menu 48 to anything from 000 to
>> 60 will
>> cause the radio to jump to that menu when you press the f key.
>> This
>> is probably how you got "locked" into menu 60.
>>
>> I keep mine set at 62 for s meter and hit the menu key twice
>> quickly to
>> get frequency.
>>
>> 73, Steve KW3A
>>
>> On 9/11/2013 9:10 AM, Steve Forst wrote:
>> Jim,
>>
>> Since you seem to know where you are, I assume the speech is
>> working .
>> I don't think menu 60 has sub menus, so if you are there, just
>> use the
>> knob to go to menu 48and try setting to 60 or 61 and see if
>> you get
>> the readout you want.
>>
>> You should get the Kenwood software and keep a back up of
>> settings that
>> can be restored later.
>>
>> A partial reset will leave menu and memory settings in place.
>> I think
>> you need to do a full reset to reset menus, but I don't think
>> you are
>> there at this point.
>>
>>
>> 73, Steve KW3A
>>
>> On 9/11/2013 12:57 AM, Jim Gammon wrote:
>> Help! From anyone who has a TS-480, I have mine stuck in menu 60
>> where I can't get any VFO announcements. I think it may require
>> a QSO on the phone from some expert out there who can possibly
>> talk me through resetting the menus hopefully without resitting
>> the entire radio so I don't lose the stuff I have in memories.
>> 73, Jim WA6EKS
>>
>> ----- Original Message -----
>> From: "Howard, W A 9 Y B W" <[log in to unmask]
>> To: [log in to unmask]
>> Date sent: Tue, 10 Sep 2013 22:32:53 -0500
>> Subject: CQ CQ CQ
>>
>> Just wondered if there is any life out there? Its been quiet
>> lately.
>>
>> Howard #3
>>
>>
>>
>
|