Hi All,
The 440 and radios of that ilk use the VS-1. The 850 and radios of that ilk
use the VS-2. These radios are getting old, and the VS-1 and VS-2 are hard
to get.
The 570 and 2000 use the VS-3. The VS-3 is still available, and the 570 is
a robust radio. It was discontinued due to the ban on leaded solder.
The newer 480 and 590 use the VGS-1.
I would personally go for a 570 or 480. There are accessibility reviews on
the Active Elements site. The 480 has the better voice chip, but is a
remote head with a separate main unit.
Best wishes, Kelvin Marsh - M0AID
Working to improve accessibility for radio amateurs with disabilities
www.active-elements.org
For accessibility evaluations of amateur equipment and MP3 manuals
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Curtis Delzer
Sent: 28 March 2014 03:50
To: [log in to unmask]
Subject: Re: best radio for the blind under $800?
doesn't the vs1, the same one that works with the tmv71A work with the
TS440?
Curtis Delzer.
HS.
K 6 V F O
San Bernardino, CA.
[log in to unmask]
skype: curtis1014
On Thu, 27 Mar 2014 17:31:07 -0400
Steve <[log in to unmask]> wrote:
> The problem is trying to find a working voice unit for the 440.
> ----- Original Message -----
> From: "John Miller" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, March 26, 2014 10:15 AM
> Subject: Re: best radio for the blind under $800?
>
>
> > Almost any 440 alive today has been fixed if it was going to have that
> > problem and there are a ton of them still on the air. I talk to about 5
of
> > them on a daily basis.
> > ----- Original Message -----
> > From: "Matt Arthur" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Wednesday, March 26, 2014 9:35 AM
> > Subject: Re: best radio for the blind under $800?
> >
> >
> >> Hi all,
> >> I would kind of shi away from the ts440
> >> unles it has been gone through and rebuilt
> >> They used some kind of glue that over time becomes a conductor and then
> >> causes the radio to do strange things.
> >> I went through two of them.
> >> I think the rest of the kenwoods that John mentioned are ok.
> >> Thanks 73 Matt ka0pqw
> >> ----- Original Message -----
> >> From: "John Miller" <[log in to unmask]>
> >> To: <[log in to unmask]>
> >> Sent: Wednesday, March 26, 2014 8:14 AM
> >> Subject: Re: best radio for the blind under $800?
> >>
> >>
> >>> You're not going to find a 590 in that price range and if you could
I'd
> >>> be
> >>> leery of it at best. TS-570, 450, 940, 440, maybe a TS-480, TS-850,
any
> >>> of
> >>> those you may find in that price range, I've had all but the 480 and
the
> >>> rest are very good. I know plenty of people with 480's who like them,
> >>> including one person with 3 of them, house, car and other house. Some
of
> >>> those I listed don't have a lot of parts made anymore, 440, 450, 940,
> >>> but
> >>> there are plenty of good ones out there and still some people who can
> >>> get
> >>> or
> >>> substitute parts for repair if needed in most cases.
> >>> ----- Original Message -----
> >>> From: "eric oyen" <[log in to unmask]>
> >>> To: <[log in to unmask]>
> >>> Sent: Wednesday, March 26, 2014 9:08 AM
> >>> Subject: best radio for the blind under $800?
> >>>
> >>>
> >>>> hello everyone.
> >>>>
> >>>> well, it looks like I finally won against UPS. I should be getting my
=
> >>>> funds in 10 days. Now, all I need is a blind friendly HF radio. Newer
=
> >>>> would be better, but I will only have about $800 to spend. Land Air =
> >>>> Communications in NY has a few kenwood models with the speech chip. =
> >>>> Unfortunately, no ts-590 in stock. He has a few 940's and a 540
(among
> >>>> a
> >>>> =
> >>>> few others). I would like some input from you guys on what would
work.
> >>>>
> >>>> I am looking for one that can use the speech module (vs or vg series)
=
> >>>> and doesn't require computer control.
> >>>>
> >>>> anyone have suggestions? I would like to stick with the kenwood line
if
> >>>> =
> >>>> possible. if not possible, then going with one of the other rands
that
> >>>> =
> >>>> can be easily computer controlled (as well as read) would certainly
be
> >>>> =
> >>>> helpful.
> >>>>
> >>>> thanks,
> >>>>
> >>>> Eric
|