Steve,
Although I couldn't remember the menu number, I agree with your diagnosis.
I can't think of any other button or setting that would make that happen.
Steve
----- Original Message -----
From: "Steve Forst" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, March 11, 2014 04:10
Subject: Re: Help with a TS480 issue.
> Not sure this is the answer to your problem, but check menu 007.
> Default is "off". If turned "on", memories are tunable with the VFO
> knob.
>
>
> If this menu is currently set to "off", then obviously it is something
> else.
>
> 73, Steve KW3A
>
>
> On 3/11/2014 1:46 AM, Jim Gammon wrote:
>> Hi listers. I got my 480 into a strange mode where, when I go
>> into the memories, they are now hooked up to the VFO which I have
>> never experienced before. Now, if I am in a programmed memory,
>> and tune the VFO, it will change the frequency. I must have
>> punched a button, but I'll be darned if I can figure out what I
>> did to cause this, and would really like to put it back the way
>> it was before. I bet the 590 has a similar feature just like
>> menu 34 effects the side tone on both rigs, at least I hope they
>> might be the same dealing with this problem. 73, Jim WA6EKS
>>
>>
>>
>
|