Or a connector not very well fitted!



ATB

David W Wood 

-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of John Miller
Sent: Sunday, February 09, 2014 12:56 PM
To: [log in to unmask]
Subject: Re: 75m issue

With no tuner in line how is the swr with a dummy load on the end of the 
coax, if then it's 30/1, you have a coax issue.
----- Original Message ----- 
From: "Mike Ryan" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, February 08, 2014 11:02 PM
Subject: 75m issue


> Hi all:
>
> On the one hand I got my buddy researching my antenna to death and coming
> up with a theory that my antenna shouldn't have the Unun balun because 
> it's
> not a 4/1 which is what I'm supposed to have.
> Tom assures me that the way I have my antenna set up is just fine and it's
> the coax. Tom suggested I place a dummy load at the end of my coax and I
> should have a flat or very low SWR. If it was high then it was definitely
> the coax. I did just that and the SWR was 30/1 but was able to be tuned to
> flat and held.
> My buddy put my tuner on his wire antenna with 1kw through it with no
> issues.
> Omg the trials. I don't know who to believe.
>
> 73:
> Mike VO1AX