Wow, don't think I'll be purchasing one of these right away. Jim
WA6EKS
----- Original Message -----
From: "Alan R. Downing" <[log in to unmask]
To: [log in to unmask]
Date sent: Mon, 16 Dec 2013 01:45:56 -0700
Subject: Re: Luso towers
Nope, the tower weighs a svelte 29700 pounds, and the rebar cage
weighs 1419
pounds.
Alan R. Downing
Phoenix, AZ
-----Original Message-----
From: For blind ham radio operators
[mailto:[log in to unmask]]
On Behalf Of Colin McDonald
Sent: Sunday, December 15, 2013 11:51 PM
To: [log in to unmask]
Subject: Re: Luso towers
wow, nice gig if you can get it.
so that wasn't a typo, 29 thousand 700 pounds for the tower?
73
Colin, V A6BKX
--------------------------------------------------
From: "Alan R. Downing" <[log in to unmask]
Sent: Sunday, December 15, 2013 11:46 PM
To: <[log in to unmask]
Subject: Re: Luso towers
The width of the bottom section is 65 inches, less than I would
have
guessed. Width of the top section is 18 inches. I don't know
what the
foot
print of the rotating base is, but that may well be
significantly larger
than the first section of the tower itself.
Here is an interesting fact, when buying any of these towers,
you must pay
for a Luso construction engineer to travel to your station from
Japan, to
supervise the entire preparation and installation activities..
You must
pay
all of his expenses, including airline tickets, hotel room, etc.
The
reason
for this is to assure that the tower is installed correctly. My
friend
that
just bought the 90 foot model, had to pay around $5 grand for
the
engineers
presence.
Alan
Alan R. Downing
Phoenix, AZ
-----Original Message-----
From: For blind ham radio operators
[mailto:[log in to unmask]]
On Behalf Of Colin McDonald
Sent: Sunday, December 15, 2013 10:36 PM
To: [log in to unmask]
Subject: Re: Luso towers
heavy duty alright at around 15 tonnes...that sounds a bit on
the heavy
side? A heavy duty 68 foot del hi only weighs maybe 500 pounds
total...this
must be a very very large tower? that is, very large spread at
the bottom
to
support so much weight at the top?
Obviously a 68 foot del hi is only rated for about 12 square
feet of wind
load though lol.
I can't imagine shipping on a beast like that haha.
73
Colin, V A6BKX
--------------------------------------------------
From: "Alan R. Downing" <[log in to unmask]
Sent: Sunday, December 15, 2013 8:14 PM
To: <[log in to unmask]
Subject: Luso towers
Hello list,
Has anyone on the list looked into Luso towers when shopping for
a new
one?
For those that aren't aware of Luso, it is a Japanese tower
builder of
heavy
duty electrically operated crankup towers in heights from 90
feet to over
300 feet. They accommodate antenna, rotor, and mast weight of
up to 2200
pounds. The 150 foot model is rated to accommodate 140 square
foot of
antenna, and goes from a fully retracted height of 42 feet to a
fully
extended height of 145 feet in 29 seconds. Masts of up to 8.6
inch
diameters are accommodated with multiple thrust bearings. Each
model is
available with a number of options, including a rotating base,
and
automatic
retraction when winds exceed a preset level. The 150 foot model
weighs
29700 pounds excluding options.
A friend just took delivery of the 90 foot model with the
rotating base
and
automatic retraction system. Because of my recent good news on
the
health
front, I am seriously thinking of ordering the 120 foot tower
with the
rotating base, automatic retraction, 4 inch mast with thrust
bearings,
and
a
prop pitch rotor with Green Heron controller.
If anyone has investigated the Luso offerings, I'd appreciate
discussing
them with you.
Merry Christmas everyone, and a very happy New Year.
Best 73
Alan
|