Why not just leave the monitor off?
I never turn on my monitor unless I need sighted assistance with my
computer.
-----Original Message-----
From: Tom Behler
Sent: Saturday, November 16, 2013 8:44 AM
To: [log in to unmask]
Subject: Re: Anoying Interference Issue
Lloyd:
What you are suggesting is in line with what Steve (KW3A) suggested earlier
in this thread.
I will first systematically dis-connect peripherals while leaving the main
desktop unit on, to see if any of them are the culprit.
If the culprit happens to be the monitor, I have another one that I can put
in its place if needed.
Will probably be a project for later today or tomorrow, although we are
going to be hosting a dinner for a few work colleagues later tomorrow
afternoon here at the house, which I will have to help prepare for.
I appreciate your suggestions very much.
Tom Behler: KB8TYJ
----- Original Message -----
From: "Lloyd Rasmussen" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, November 15, 2013 7:30 PM
Subject: Re: Anoying Interference Issue
> Power cord placement will probably not make much difference on higher HF
> frequencies. Is your monitor on when this happens? If this is a desktop,
> what happens if you temporarily disconnect the keyboard, the mouse, the
> ethernet cable, etc.?
>
>
>
> Lloyd Rasmussen, Kensington, MD
> http://lras.home.sprynet.com
> -----Original Message-----
> From: Tom Behler
> Sent: Friday, November 15, 2013 8:30 AM
> To: [log in to unmask]
> Subject: Anoying Interference Issue
>
> Hi, all.
>
> As I think many of you know, I am currently in the process of switching to
> a
> Windows 7 PC as my main home computer. I will be using the PC for both
> professional and personal purposes here in my home office.
>
> My home office is also where I have my ham station set up, which does have
> its advantages if I need to take a little break and check out the bands
> every once in a while. (grin)
>
> Anyway, I have just noticed that when this new computer is running, it
> places all sorts of little birdies across the HF bands, particularly the
> higher HF bands like 10 and 15 meters.
>
> To me, this obviously means that the computer has a very poorly-designed
> switching power supply.
>
> My question is what might I be able to do to minimize this interference?
>
> I have thought of switching the computer to another circuit in the house,
> but that would involve running an extension cord into another room, which
> could be a bit of a pain.
>
> If there is a fortunate side to this dilemma, it is that I am not going to
> be using the PC for ham radio applications such as logging, rig control,
> and
> the like. Those functions are done via a separate Windows XP laptop that
> I
> have on my ham radio operating desk.
>
> Of course, the obvious low tech solution to this issue would simply be to
> turn off the main PC whenever I am operating on the HF bands, and I may
> have
> to resort to that for now.
>
> If, though, there is something else I might want to try, please let me
> know.
>
> Tom Behler: KB8TYJ
>
|