Tom,
The tile ceiling in your office should have metal supports for the tiles.
Consider sticking the antenna to these metal support rails and see if there
is a place that works. Hopefully, the supports are metal and not aluminum.
Hopefully, you can find a place out of the way where one won't run in to the
antenna unless you have ten or so foot high ceilings.
73
Howard #3
----- Original Message -----
From: "Tom Behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, August 17, 2013 10:05 AM
Subject: 2-meter Antenna Challenge
> Hi, all.
>
> I hope I am not wearing out my welcome back to the list, but I have a
> challenging antenna situation I'm currently facing in the new faculty
> office
> I will be occupying starting this Spring semester.
>
> I currently have an old Kenwood TMV7A in the office, with which I have
> always had at least some luck, in terms of getting into our local 2-meter
> repeater. The repeater is about 15 miles from the University.
>
> However, in my new office, I am finding that the small mag-mount antenna I
> have always used simply does not allow me to reach the repeater
> consistently. Currently, I have the magmount sitting on a small metal
> bracket on the window sill in the office. It is right next to the window,
> so I would think that should help. However, I do not have much of a
> ground
> plain for the magmount. I also think there is some de-sensing going on
> with
> the steel of the office building, and with other surrounding computer
> equipment in the office complex.
>
> I do have a filing cabinet on the other side of the office that I could
> use
> as a ground plane, but the top of the filing cabinet is too high, and
> there
> is not enough space between it and the office ceiling to accommodate the
> magmount antenna.
>
> This obviously is a very challenging situation, and I also have to be at
> least somewhat concerned with appearance, in terms of not having an
> ugly-looking antenna that might draw more attention to what I am trying to
> do than I might want.
>
> Do any of you have any suggestions as to how to help the mag-mount perform
> better in this situation?
>
> Or, might I be better off considering another type of antenna, such as a
> J-pole of some sort.
>
> I would appreciate any thoughts.
>
> Tom Behler: KB8TYJ
|