The last one I bought for the tmv-71 didn't come with the cushions any 
more, came with some strange little plastic clip that I never figured 
out, so I just made some pads out or of electrical tape.
73
Butch
WA0VJR
Node 3148
Wallace, ks.


On Mon, 18 Nov 
2013, Alan R. Downing wrote:

> Following is the instructions that my friend Steve, N9HE, gave me.  He just
> installed the chip/board in his 590.  I hope this helps:
>
>
>
> Remove the bottom cover then remove the shield cover. There are 5 rubber
> cushions in the VGS-1 package.  Use the 2 rubber cushions sized 20x30x2mm
> and 21x21x2.5mm.  Attach the larger pad on top of the VGS-1 and the smaller
> pad on the bottom of the VGS-1.  The remaining cushions are not used.  Plug
> in the VGS-1 and replace the shield cover then replace bottom cover.
>
>
>
> 73
>
> KD7GC
>
>
>
>
>
> Alan R. Downing
>
> Phoenix, AZ
>
>
>
>