BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Steve Forst <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Thu, 18 Jul 2013 18:07:02 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (162 lines)
Hi Jim,

I guess the old line is that if it ain't broke, don't fix it.   I pretty 
much do a choke all the time, but if you have no RFI problems,  I 
probably wouldn't bother.

It's usually done on a 6 inch diameter core, and anywhere from 6 to 10 
turns, depending on who's bible you are reading.

Good luck with the ground rod.  I just pounded a rod in yesterday at the 
new coax entry point.  Hope you ate your Wheaties.

73, Steve KW3A


On 7/18/2013 5:48 PM, Jim Gammon wrote:
> Hi Steve, what is the diameter of the 10 turn coax choke? In my
> case, I am not using any power over the 100 watts, am using a
> DXCC center fed antenna with no ballon, do you think there is any
> need for a coax choke with this kind of set up.  My recollection
> is that there is not, but I am always open to thoughts on this
> subject.  I just found out that my ground may not be sufficient
> so am off to get an eight foot ground rod to pound in by my
> shack.  Jim WA6EKS
>
>   ----- Original Message -----
> From: Steve Forst <[log in to unmask]
> To: [log in to unmask]
> Date sent: Thu, 18 Jul 2013 17:44:22 -0400
> Subject: Re: Windom 6 thru 80 meter antenna
>
> Fred,
>
> One final thing I'll throw out as a head's up, is that  since the
> off
> center fed antenna is unbalanced,  there is a bit more of a
> chance of
> RFI then with  a center fed dipole.    More likely if you run
> power.
>      I had some RFI  when running a THP solid state amp on 1 or 2
> bands,
> which caused the amp to fault.   A ten turn coax choke at the
> feedpoint
> fixed it.
>
> I won't say it is a common problem, but  it is something you
> should be
> aware of.
>
>
> You might want to look at reviews  on e-ham to help with your
> research.
>
> 73,
> Steve KW3A
>
> On 7/18/2013 4:51 PM, Fred Adams wrote:
>   I just got my wife to help me do a little measuring and I
> believe I can
>   just fit the 80 meter windom antenna in.  I plan to put a small
> station in
>   my bedroom and I have a small 38 foot roan tower outside my
> bedroom so I
>   think I have the support in the perfect place.  It looks more
> interesting
>   all of the time.  I am close to the city airport so I can't put
> up anything
>   very high.  My base station is about 42 feet at the apex and
> does fine for
>   what I do.  On my base station I have a 80 double bazooka and a
> DXCC
>   antenna.   Thanks to all of you guys for the info.  I will let
> you know how
>   things work out.  I think I will give the windom a good try.
> Thanks again,
>
>   -----Original Message-----
>   From: For blind ham radio operators
> [mailto:[log in to unmask]]
>   On Behalf Of Steve Forst
>   Sent: Thursday, July 18, 2013 3:52 PM
>   To: [log in to unmask]
>   Subject: Re: Windom 6 thru 80 meter antenna
>
>   Ok Fred.   If you plan on using a support to  hold up the
>   balun/feedline, figure about 90 feet for the long end of the
> antenna and
>   45 feet for the short end.  If you are lucky,   you will have an
>   existing  support at the right spot.    I didn't use any support
> for the
>   feedpoint, but many people do.
>
>   73, Steve KW3A
>
>   On 7/18/2013 3:43 PM, Fred Adams wrote:
>   Steve, thanks much.  I plan to do some outside measuring and a
> little
>   further checking on the antenna but I like the sound of the info
> that
>   you provided.  Thanks again,
>
>   -----Original Message-----
>   From: For blind ham radio operators
>   [mailto:[log in to unmask]]
>   On Behalf Of Steve Forst
>   Sent: Thursday, July 18, 2013 3:29 PM
>   To: [log in to unmask]
>   Subject: Re: Windom 6 thru 80 meter antenna
>
>   Fred,
>
>   It is basically the same length as a full size 80 meter dipole,
> just
>   that the feedpoint is off center.   Depending on what brand you
> go with,
>   it will be  somewhere around 133 - 136 feet long and  feedpoint
> will
>   be around 2/3 from one end.  Baluns will also vary: some use 4:1
> and
>   others use 6:1.
>
>   I had one up a few years ago and it worked quite well.  It works
>   harmonically on bands above the lowest band (80 meters), so no
> tuner
>   needed on 40, 20, 10, and even on 12 and 17 meters.   It's not
> resonant
>   on 30 and 15 meters although you can use a tuner and make it
> work.
>   There is also a mod to add a parallel dipole to make it resonant
> on 30
>   and 15.
>
>   Mine was set up in a slanting  configuration, with one end
> hanging
>   down from the highest point.  I think it can work in a few
> different
>   configurations, but  maybe the flat top or inverted vee are the
> most
>   common.
>
>   Good luck, Steve KW3A
>
>   On 7/18/2013 3:11 PM, Fred Adams wrote:
>   Are any of you guys running the 6 thru 80 meter windom antenna?
> If
>   so, I would appreciate some info on this antenna.  How long are
> the
>   legs and best height for average use?  Any good or bad things
> that
>   you have to say about the antenna.  I recently heard a guy
> talking on
>   a windom and he had a very good signal barefooted and this got
> me
>   interested.  First, I have to know the length so I can find if I
> have
>   the
>   space.  I will appreciate any info
>   good or bad.   Thanks much,
>
>
>

ATOM RSS1 RSS2