Is there any use of having a MARS op outside the U S?
Scott
N0HOK / ZL1CHM
Auckland New Zealand
Sent from my iPhone
On 14/02/2013, at 3:15 PM, John Miller <[log in to unmask]> wrote:
> Usually if you send a copy, via email is fine, of your mars license or even
> the email or letter saying you're application was accepted and you can go on
> with trial status, send that to the manufacturers via email is fine and
> they'll usually email you the correct mod pretty fast. That way you don't
> run in to that one wrong mod online that will give you problems. Not that
> usually there is one, but I've heard horror stories in the past. Also for
> future reference, I'm told when you order a new radio, more often than not a
> lot of the places, upon seeing your mars license again via email or what
> ever, will do it for you before shipping. Most 2-way radio shops will do it
> as well if you bring the radio and paperwork but the rates aren't worth it.
> Or, there's always someone willing to help you with in the MARS group too.
> ----- Original Message -----
> From: "Steve Forst" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, February 13, 2013 3:38 PM
> Subject: Re: MARS question
>
>
>> Albert,
>>
>> The MARS mod on the 590 is to open up a surface mount resistor. I think
>> it is R900, but you need to confirm that from a reliable source.
>>
>> While it is considered a "resistor" it actually has zero ohms
>> resistance and acts as a jumper. Some guys cut it with an x-acto
>> knife, or crush it with needle nose pliers. Others will unsolder one
>> end and lift it off the pad so it could be reinstalled later if you
>> wanted to restore the radio to ham band only transmit.
>> In any event, you will need sighted help on this one.
>>
>> 73, Steve KW3A
>
|