tx and rx tones are precisely the same tones...IE, 100HZ is 100HZ if it's on
transmit or receive.
I think there are about 38 standardized tones in common usage.
And regardless of what they are called, they are all the same.
weather you are using a yaesu, kenwood, icom, alinco, baofeng, wouxun,
motorola, GE, standard, vertex, whatever under the sun, 110.9 is still 110.9
no matter what it's refered to as.
It's like any frequency...146.52 is still the same frequency no matter what
radio you have it on right?
73
Colin, V A6BKX
----- Original Message -----
From: "Lou Kolb" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, November 05, 2012 2:13 PM
Subject: Re: TS480/SAT in FM operation
> Ok, I do understand that, Bob. Are the tones the same frequency? And are
> the 2 tones of different natures? It still seems to me that they're both
> continuous tones, although they may be different frequencies. I've never
> run a repeater and there are several on this list who have so I'm sure
> you'll get good info.
> Lou Kolb
> Voice-over Artist:
> Radio/TV Ads, Video narrations
> Messages On-hold:
> www.loukolb.com
> ----- Original Message -----
> From: "Bob Ray" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Monday, November 05, 2012 3:45 PM
> Subject: Re: TS480/SAT in FM operation
>
>
>> Lou, After giving it some thought I do have a better explanation of what
>> we
>> are doing. We have a PL tone on the repeater's receiver so that the
>> repeater is only activated by those transmitting that tone. The repeater
>> in
>> turn puts out a tone on its transmissions so that only receivers that
>> have
>> that CTCSS tone turned on are going to receive the signal. I hope that
>> makes more sense than my first explanation did.
>>
>> Bob
>>
>> -----Original Message-----
>> From: For blind ham radio operators
>> [mailto:[log in to unmask]]
>> On Behalf Of Lou Kolb
>> Sent: Monday, November 05, 2012 2:32 PM
>> To: [log in to unmask]
>> Subject: Re: TS480/SAT in FM operation
>>
>> Bob,
>>
>> I thought they were the same. Perhaps I'm misunderstanding what you mean
>> by
>> ctcss and Pl tones, but I thought both those terms refered to a tone
>> that's
>> transmitted continuously as long as the transmitter is up to hold the
>> squelch open on the receiving end. I'm sure someone will correct me if
>> I'm
>> wrong. 73, Lou Lou Kolb Voice-over Artist:
>> Radio/TV Ads, Video narrations
>> Messages On-hold:
>> www.loukolb.com
>> ----- Original Message -----
>> From: "Bob Ray" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Monday, November 05, 2012 3:11 PM
>> Subject: TS480/SAT in FM operation
>>
>>
>>> Anyone that has experience with the 480 on fm repeaters may be able to
>>> help with this. We have just added tones to our local repeater. The
>>> 480 manual, if I am reading it right, doesn't allow you to have a pl
>>> tone and a CTCSS tone at the same time. Does anyone have a work
>>> around for this?
>>>
>>> Bob kd0br
|