Sender: |
|
Date: |
Sun, 13 Apr 2014 14:34:46 -0400 |
Reply-To: |
|
Message-ID: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
In-Reply-To: |
|
Content-Type: |
text/plain; charset=ISO-8859-1; format=flowed |
From: |
|
Parts/Attachments: |
|
|
Are you sure the baud rates match in both the radio and software? I
know this applies to the 2000 and 590 and assume it also applies to the
480: If you change baud rate in the radio, you need to turn the radio
off and then back on to have the change take effect.
I know the radio and software can be set to some pretty high baud rates,
but sometimes this can cause problems if set too high. Try backing
radio and software down to something like 9600 and see if it works.
Do you use any logging software with this setup that has rig control?
If so, you can confirm that your hardware and connections are good and
narrow it down to the Kenwood software.
Since it worked before, I assume you are using the correct "straight
through" cable and not a "null modem" cable.
73, Steve KW3A
.
On 4/13/2014 1:58 PM, Don Risavy, Jr.; NR4DR wrote:
> Wondered if anyone has ever had the following happen or occur with their
> TS480/SAT when using the ARCP-480 computer programming softwre4 from Kenwood
> attached the radio though a serial com port or even using an USB to serial
> adaptor?
>
> An unknown device is connect to com# or the baud rate in this software
> doesn't match the baud rate in the radio check the status com port .
>
> I've tried changing com ports, installing another serial card and also tried
> the USB adaptor with two different serial cables and still getting the same
> error.
>
> So am hoping isn't something wrong with the radio all of the sudden since
> always leave the serial cable connected from the computer to the radio so
> can control it when wanted.
>
> This just started recently or sometime this month from what remembered.
>
> Thanks.
>
> Cul 73 Don nr4dr
>
>
>
>
>
> Don Risavy, Jr.
> CompTia A+ PC Technician
>
> Pensacola, Florida
>
> Home Email:
>
> <mailto:[log in to unmask]> [log in to unmask]
>
> Home Webpage:
>
> <http://www.adaptaworld.com> http://www.adaptaworld.com
>
> Ham Radio Email:
>
> [log in to unmask]
>
> Ham Radio Webpage:
>
> <http://www.risavy.us> http://www.risavy.us
>
> Work:
>
> CIL Disability Resource Center
>
> IL Specialist & Peer mentor
> Pensacola, Florida
> Work Email:
> <mailto:[log in to unmask]> [log in to unmask]
> Work Webpage:
> <http://www.cil-drc.org> http://www.cil-drc.org
>
>
>
>
>
>
>
|
|
|