Hi Steve.  Got it, it worked! Thanks much.  I couldn't get my VFO 
to announce frequencies.  That's always been confusing to me.  
But, I relearned again how to get s meter readings from having 
this difficulty.  Thanks much.  Jim WA6EKS

 ----- Original Message -----
From: Steve Forst <[log in to unmask]
To: [log in to unmask]
Date sent: Wed, 11 Sep 2013 09:10:32 -0400
Subject: Re: Help with my TS-480

Jim,

Since you seem to know where you are, I assume the speech is 
working  .
  I don't think menu 60 has sub menus, so if you are there, just 
use the
knob to go to menu 48and  try  setting to  60 or 61 and see  if 
you get
the readout you want.

You should get the Kenwood software and keep a back up of 
settings that
can be restored later.

A partial reset will leave menu and memory  settings in place.  I 
think
you need to do a full reset to reset menus, but I don't think you 
are
there at this point.


73, Steve KW3A

On 9/11/2013 12:57 AM, Jim Gammon wrote:
 Help! From anyone who has a TS-480, I have mine stuck in menu 60
 where I can't get any VFO announcements.  I think it may require
 a QSO on the phone from some expert out there who can possibly
 talk me through resetting the menus hopefully without resitting
 the entire radio so I don't lose the stuff I have in memories.
 73, Jim WA6EKS

   ----- Original Message -----
 From: "Howard, W A 9 Y B W" <[log in to unmask]
 To: [log in to unmask]
 Date sent: Tue, 10 Sep 2013 22:32:53 -0500
 Subject: CQ CQ CQ

 Just wondered if there is any life out there?  Its been quiet
 lately.

 Howard #3