Subject: | |
From: | |
Reply To: | |
Date: | Thu, 14 Nov 2013 09:12:25 -0800 |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
You should also get speech when changing the low and high cut settings.
I think I have missed some of these posts. Are you not getting any
speech?
73
Butch
WA0VJR
Node 3148
Wallace, ks.
On Thu, 14 Nov 2013, Alan R. Downing wrote:
> My menu 15 is set to number 5.
>
>
> Alan R. Downing
> Phoenix, AZ
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Steve Forst
> Sent: Thursday, November 14, 2013 7:46 AM
> To: [log in to unmask]
> Subject: Re: 480 question
>
> Alan,
>
> My previous post assumes that the VGS-1 voice board is installed and is
> speaking. Menu 15 needs to be set to something other than "off".
> This is the voice announcement volume, and of course if set to "off" you
> will get no speech.
>
> 73, Steve KW3A
>
> On 11/14/2013 9:10 AM, Steve Forst wrote:
>> Try setting menu 48 to number 61. Since the 480 only has 1 pf key,
>> many of us will set the pf key to some other function and get frequency
>> readout by pressing the enter key twice quickly.
>>
>> 73, Steve KW3A
>>
>> On 11/14/2013 8:52 AM, Alan R. Downing wrote:
>>> Does anyone on the list know how to restore the default action of the PF
>>> button? The PF button is the button immediately below the power
>>> button on
>>> the upper left hand corner of the front panel. My understanding is that
>>> pressing the PF button is supposed to speak the current frequency when in
>>> its default condition. Mine does not.
>>>
>>>
>>>
>>> Thanks in advance for any help.
>>>
>>>
>>>
>>> KD7GC
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Alan R. Downing
>>>
>>> Phoenix, AZ
>>>
>>>
>>>
>>>
>>>
>
>
|
|
|