Alan,

My previous post assumes that the VGS-1 voice board is installed and is 
speaking.   Menu 15 needs to be set to something other than "off". 
This is the voice announcement volume, and of course if set to "off" you 
will get no speech.

73, Steve KW3A

On 11/14/2013 9:10 AM, Steve Forst wrote:
> Try setting menu 48 to number 61.    Since the 480 only has 1 pf key,
> many of us will set the pf key to some other function and get frequency
> readout by pressing the enter key twice  quickly.
>
> 73, Steve KW3A
>
> On 11/14/2013 8:52 AM, Alan R. Downing wrote:
>> Does anyone on the list know how to restore the default action of the PF
>> button?  The PF button is the button immediately below the power
>> button on
>> the upper left hand corner of the front panel.  My understanding is that
>> pressing the PF button is supposed to speak the current frequency when in
>> its default condition.  Mine does not.
>>
>>
>>
>> Thanks in advance for any help.
>>
>>
>>
>> KD7GC
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Alan R. Downing
>>
>> Phoenix, AZ
>>
>>
>>
>>
>>