47K ohms and 100K ohms are the resister values.
I don't know which is which, but I think 47K to ground on the up/down
activates the 1 and 2 keys, and 100K the 3 and 4 keys...that could be wrong
though I don't really remember.
73
Colin, V A6BKX
----- Original Message -----
From: "Michael Thurman" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, July 09, 2013 5:36 PM
Subject: Re: TS-2000
> there are 5 programable function keys, one is for your pf button located =
> just to the left of the power button on the top left, the other four are =
> for the hand mic with the keypad, which is an optional accessory. yo =
> can also build a button bo to simulate the extra function keys if you =
> like. I do not remember the resistor values required for that off the =
> top of my head, but placing different resistance values from the up or =
> down mic pins to ground activates the extra functions. i will probably =
> build one of those boxes. I believe the default setting for the button =
> is to speak the frequency, but it can be set to speak the s meter =
> instead if you prefer. I forget what it is called, but the first pf =
> button in the series of menus is for the front panel pf key if memory =
> serves. if you do not have the hand mic with the buttons, or a button =
> box you can just set all o them to the desired function and not worry =
> about it until you get a mic with extra buttons or build a box.
> I hope this ells. I wi try and find a better answer for you if none else =
> beats me to it
>
> 73 kb7nla
> On Jul 9, 2013, at 6:30 PM, Jim Gammon <[log in to unmask]> wrote:
>
>> Gary, does your mic on the 2000 have a key pad? I also have a=20
>> Ts-2000 and the hand mic has no keypad for entering information. =20
>> Jim WA6EKS
>>=20
>> ----- Original Message -----
>> From: Gary Tillinghast <[log in to unmask]
>> To: [log in to unmask]
>> Date sent: Tue, 9 Jul 2013 18:09:12 -0400
>> Subject: TS-2000
>>=20
>> Hi all,
>> I read the manual on the TS-000 and need some clarity on setting=20
>> up the =3D
>> "PF" keys on the microphone. Not sure which PF key is done under=20
>> menu =3D
>> 51 and the different values of each number assigned. thanks Gary=20
>> KB2YAA =3D
>> the
|
