Hi Doug,
Not sure I understand the question, but I think the answer is "no".
When I use the tnc emulation, I use a second pc running Win XP. I have
tried it using a single pc (main computer is Win 7 64 bit), but this
still uses a 9 pin null modem serial cable between 2 usb/serial ports
on the Win 7.
Since I use my Writelog contest logger as the transmit program, one
benefit I get from using a second pc is that the RX pc is always
active and I don't have to alt-tab between Writelog for tx and mmtty for rx.
A possible advantage you may get either using a single pc with tnc
emulation, or 2 pc's, is that you may have access to some terminal
software that reads the incoming text better than mmtty does by itself.
This assumes that mmtty is decoding the text, but your screen reader
is just not speaking things to your liking, but speaks better using
some terminal program.
Can you get mmtty to decode incoming text? If all you get is gibberish
from MMTTY alone, you will just get the same gibberish using tnc
emulation, only it will be coming out of a different program.
Not sure this was much help. Have you looked at the info regarding
digital modes on the site: hamradioandvision.com
I do things different then what is described in the articles, but there
is more than one way to do this stuff, so whatever works for you.
If you are not decoding any incoming text with mmtty, you need to look
at soundcard, software and rig settings, as well as your tuning process.
73, Steve KW3A
On 7/9/2013 12:24 AM, Doug Payne wrote:
> HI Steve,
>
> I'm starting to play with MMTTY again. Are you still using TNC emulation
> mode? Is that easier than trying to red the decoded text in the MMTTY
> window?
>
> I'm using Windows 7. Is there such a thing as a virtual null
> modem--something which can "connect" MMTTy to a terminal emulator without
> resorting to a physical connection?
>
> Sorry if I'm not even in the ballpark on this one...my brain tends to go all
> foggy when it comes to digital modes.
>
> --doug, AC7T
>
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Jim Kutsch, KY2D
> Sent: Monday, February 18, 2013 1:27 PM
> To: [log in to unmask]
> Subject: Re: TNC command
>
> Steve,
> Are you sure it's from the TNC? When I first started using terminal
> applications in Windows using Jaws, the system time in the task bar line of
> the screen triggered a reread every time it changed. Thus, time was read
> every minute. I went to the "task bar and start menu" setting in Windows
> Control Panel and unchecked the "show clock" box. Then all was well.
>
> 73,
> Jim, KY2D
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Steve Forst
> Sent: Monday, February 18, 2013 3:02 PM
> To: [log in to unmask]
> Subject: TNC command
>
> I've been tweaking my RTTY setup and using MMTTY's TNC emulation to
> send decoded data to a terminal program. Either the packet window in
> XMlog, or hyperterminal.
>
> Beside the wanted data, I also get a date/time stamp every 60 seconds.
> Something like"Mon Feb 18 1950". It gets a bit annoying.
>
> Is there a TNC command to stop this?
>
> 73, Steve KW3A
>
>
>
|