I did, and it only happens when it is right next to the modem.

At 07:28 AM 03/12/13, you wrote:
>Move the modem around.
>----- Original Message -----
>From: "Curtis Delzer" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Monday, March 11, 2013 9:46 AM
>Subject: Re: FM Transmitter Issues And Questions
>
>
> >I do know that when I turn my WIFI off on the modem, the pulsating
> > sound disappears.
> >
> >
> > At 08:29 AM 03/11/13, you wrote:
> >>Pretty sure there is no conflict between WiFi and the FM
> >>transmitter.  I would be surprised if that was the case.  Jim
> >>WA6EKS
> >>
> >>  ----- Original Message -----
> >>From: Curtis Delzer <[log in to unmask]
> >>To: [log in to unmask]
> >>Date sent: Mon, 11 Mar 2013 07:39:35 -0700
> >>Subject: Re: FM Transmitter Issues And Questions
> >>
> >>it might be picking up the pulsations from your WIFI setup.  try
> >>temporarily turning that off and see if it goes away.
> >>if it does, try using the transmitter further away from your
> >>modem? router?
> >>
> >>
> >>At 11:05 PM 03/10/13, you wrote:
> >>      Hi list,
> >>
> >>Since this is one of the lists where I got information about an
> >>FM
> >>transmitter for feeding audio from my computer to FM receivers
> >>through out
> >>my house and property, I thought I would inquire here again.
> >>
> >>I have purchased the Sansonic FM transmitter that someone
> >>referenced on this
> >>list a few months ago.  It does a real nice job with meeting my
> >>requirements
> >>of clear and clean signals through out my property.  However, I
> >>have run
> >>into one problem.  I have the transmitter fairly close to the
> >>computer from
> >>which I am running the audio.  It is about 4 feet away from the
> >>computer.  I
> >>am getting a pulsating hum through the computer speakers when the
> >>transmitter is operating.  The transmitter runs from 1 to 7
> >>watts.  In light
> >>of the issue, I don't dare put the power any higher than 1
> >>watt--and I
> >>really don't need to anyway.
> >>
> >>What can I do to solve this problem?  Any help would be greatly
> >>appreciated.