Subject: | |
From: | |
Reply To: | |
Date: | Wed, 11 Sep 2013 09:25:50 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Thanks again Steve, I'll try Menu 62 because I'd like to be able
and retrieve s meter readings by just hitting a key twice. Jim
WA6EKS
----- Original Message -----
From: Steve Forst <[log in to unmask]
To: [log in to unmask]
Date sent: Wed, 11 Sep 2013 09:34:57 -0400
Subject: Re: Help with my TS-480
Oops, meant to say set menu 48 to either 61 or 62. 61 will read
vfo,
62 will read s meter. Setting menu 48 to anything from 000 to
60 will
cause the radio to jump to that menu when you press the f key.
This
is probably how you got "locked" into menu 60.
I keep mine set at 62 for s meter and hit the menu key twice
quickly to
get frequency.
73, Steve KW3A
On 9/11/2013 9:10 AM, Steve Forst wrote:
Jim,
Since you seem to know where you are, I assume the speech is
working .
I don't think menu 60 has sub menus, so if you are there, just
use the
knob to go to menu 48and try setting to 60 or 61 and see if
you get
the readout you want.
You should get the Kenwood software and keep a back up of
settings that
can be restored later.
A partial reset will leave menu and memory settings in place.
I think
you need to do a full reset to reset menus, but I don't think
you are
there at this point.
73, Steve KW3A
On 9/11/2013 12:57 AM, Jim Gammon wrote:
Help! From anyone who has a TS-480, I have mine stuck in menu 60
where I can't get any VFO announcements. I think it may require
a QSO on the phone from some expert out there who can possibly
talk me through resetting the menus hopefully without resitting
the entire radio so I don't lose the stuff I have in memories.
73, Jim WA6EKS
----- Original Message -----
From: "Howard, W A 9 Y B W" <[log in to unmask]
To: [log in to unmask]
Date sent: Tue, 10 Sep 2013 22:32:53 -0500
Subject: CQ CQ CQ
Just wondered if there is any life out there? Its been quiet
lately.
Howard #3
|
|
|