at powerwerx.com
RT Systems Advanced Radio Programming Software and USB Cable Kit for KG-UV3D<http://www.powerwerx.com/wouxun-radios/rt-systems-radio-programming-software-usb-cable-kg-uv3d.html>
Enhanced USB cable means no more complicated USB driver setup! Easily move memories from another model radio to your Wouxun. Kit includes software CD &
USB cable. Numerous feature improvements over the factory software! Works with Windows 7, Vista, XP.
$49.99 Would be perfect for you and save you a lot of hassle.
Sounds like you are making more challenges for yourself than are necessary.
Good luck!
Dan (kb6unc)
----- Original Message -----
From: Daniel C<mailto:[log in to unmask]>
To: [log in to unmask]<mailto:[log in to unmask]>
Sent: Saturday, August 18, 2012 6:30 AM
Subject: Re: 2 meeter Repeaters And Accessible Programming Software For A Wouxun KG-UVD1P Radio
Perhaps I'm missing a step?
Am I also suppose to select menu: 2,4, then select 1 for a reepeater
with a plus value? And 2 for a minus value?
The dash (-) and plus (+) after the repeater frequency I guess
indicates that it is a repeater requiring a posative or negative value
which should be set for every repeater when selecting menu 2,4?
On 8/18/12, [log in to unmask]<mailto:[log in to unmask]> <[log in to unmask]<mailto:[log in to unmask]>> wrote:
> I'm not so worried about the repeaters as much as the programming.
> I just want to be sure I am programming in the repeaters correctly
> manually.
> I have repeaters for 2 meeters on this site I found
> http://qsl.fm/repeaters.php?region=FL&rfb=2m&search=Search+by+State<http://qsl.fm/repeaters.php?region=FL&rfb=2m&search=Search+by+State>
> As an example from the site above. If I am to program in a repeater
> with just an input tone of 94.8 I'd do:
> 1. Put in the frequency of 145.1700
> 2. Select menu 18, and set 94.8.
> How would I know what would CTCSS look like in a repeater listing?
> using the above website?
> Unless I'm reading the above site listing wrong, I don't see any CTCSS
> for any repeaters on that site.
>
> On 8/18/12, Buddy Brannan <[log in to unmask]<mailto:[log in to unmask]>> wrote:
>> Hi,
>>
>> Better than what, and where?=20
>>
>> There might be a commercial software from Powerwerx that is accessible, =
>> I don't know, but the one that Wouxun ships is pretty difficult. What =
>> trouble are you having with programming manually?
>> --
>> Buddy Brannan, KB5ELV - Erie, PA
>> Phone: (814) 860-3194 or 888-75-BUDDY
>>
>>
>>
>> On Aug 17, 2012, at 10:17 PM, Daniel C <[log in to unmask]<mailto:[log in to unmask]>> wrote:
>>
>>> Does anyone know of any better 2 meeter repeaters that those with 2
>>> meeter radios can use?
>>> And also,, would there be any accessible software that can be used to
>>> program a Wouxun KG-UVD1P currectly?
>>> I tried to program manually, but it's abit difficult to do.
>>
>
|
