There is some good stuff for the 2000 on icanworkthisthing.com
including a nice front panel key chart.
73, Steve KW3A
On 5/21/2013 9:08 PM, Jim Gammon wrote:
> Way cool, thanks much. Jim WA6EKS
>
>
> -----Original Message-----
> From: Gary Tillinghast
> Sent: Tuesday, May 21, 2013 6:06 PM
> To: [log in to unmask]
> Subject: Re: TS-2000
>
> Hi Jim,
> The A=B button is to the left of the main volume control. About 11 am. 73.
> Gary KB2YAA
> ----- Original Message -----
> From: "Jim Gammon" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, May 21, 2013 8:58 PM
> Subject: Re: TS-2000
>
>
> As a new Kenwood 2000 user, where is the a equals b key? I find
> the observation that the older 2000's are less sensitive than the
> newer ones kind of disheartening, especially because I got the
> this rig not only for HF, but for 2 meter SSB. Jim WA6EKS
>
> ----- Original Message -----
> From: John Miller <[log in to unmask]
> To: [log in to unmask]
> Date sent: Tue, 21 May 2013 20:39:35 -0400
> Subject: Re: TS-2000
>
> You're right. I can tell with mine if I did it because I have
> the beep
> volume turned way down.
> ----- Original Message -----
> From: "Colin McDonald" <[log in to unmask]
> To: <[log in to unmask]
> Sent: Tuesday, May 21, 2013 5:37 PM
> Subject: Re: TS-2000
>
>
> what did you screw up? you can do a full or partial reset.
> Partial won't
> kill all your memories and tuner settings like the full reset
> does.
> Press the A equals B key while powering the radio on. Give it a
> second
> after powering on then hit the A equals B key again to confirm.
>
> I think the partial reset is the same but with the A plus B key.
>
> You'll know you've done it if you have the speech synth turned
> down a bit
> from default...it'll come back loud.
>
> 73
> Colin, V A6BKX
> ----- Original Message -----
> From: "Gary Tillinghast" <[log in to unmask]
> To: <[log in to unmask]
> Sent: Tuesday, May 21, 2013 3:31 PM
> Subject: TS-2000
>
>
> Hi all,
> I screwed up my TS-2000 and need to do a full reset. I thought
> I had =
> saved the procedure for doing this. Can anyone share this?
> Thanks.
>
>
>
|