Subject: | |
From: | |
Reply To: | |
Date: | Wed, 11 Sep 2013 09:34:57 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Oops, meant to say set menu 48 to either 61 or 62. 61 will read vfo,
62 will read s meter. Setting menu 48 to anything from 000 to 60 will
cause the radio to jump to that menu when you press the f key. This
is probably how you got "locked" into menu 60.
I keep mine set at 62 for s meter and hit the menu key twice quickly to
get frequency.
73, Steve KW3A
On 9/11/2013 9:10 AM, Steve Forst wrote:
> Jim,
>
> Since you seem to know where you are, I assume the speech is working .
> I don't think menu 60 has sub menus, so if you are there, just use the
> knob to go to menu 48and try setting to 60 or 61 and see if you get
> the readout you want.
>
> You should get the Kenwood software and keep a back up of settings that
> can be restored later.
>
> A partial reset will leave menu and memory settings in place. I think
> you need to do a full reset to reset menus, but I don't think you are
> there at this point.
>
>
> 73, Steve KW3A
>
> On 9/11/2013 12:57 AM, Jim Gammon wrote:
>> Help! From anyone who has a TS-480, I have mine stuck in menu 60
>> where I can't get any VFO announcements. I think it may require
>> a QSO on the phone from some expert out there who can possibly
>> talk me through resetting the menus hopefully without resitting
>> the entire radio so I don't lose the stuff I have in memories.
>> 73, Jim WA6EKS
>>
>> ----- Original Message -----
>> From: "Howard, W A 9 Y B W" <[log in to unmask]
>> To: [log in to unmask]
>> Date sent: Tue, 10 Sep 2013 22:32:53 -0500
>> Subject: CQ CQ CQ
>>
>> Just wondered if there is any life out there? Its been quiet
>> lately.
>>
>> Howard #3
>>
>>
>>
|
|
|