Well, if anyone could blow it up, Harry could do the job even though 
impossible to do
Ed   K7UC

--------------------------------------------------
From: "Steve" <[log in to unmask]>
Sent: Thursday, August 16, 2012 12:28 PM
To: <[log in to unmask]>
Subject: Re: Tuning aids, noise bridges, etc.

> Huh?  Those Conway tuning aids, I use one with my amp now, just hook up
> across the meter movement.  Not sure how you could blow the tuning aid up 
> no
> matter what output power you ran.
> ----- Original Message ----- 
> From: Tom Behler
> To: [log in to unmask]
> Sent: Thursday, August 16, 2012 6:45 AM
> Subject: Re: Tuning aids, noise bridges, etc.
>
>
>    Yeah, back in the day, I almost blew up one of those old Conway tuning
> aids that way.
>
> Forgot to reduce the power to 5 watts when tuning, but caught the problem
> just in time before too much smoke got out.  (grin)
>
> Was sure an early lesson to me that I'll never forget, even though nothing
> was lost in the process.
>
> 73 from Tom Behler: KB8TYJ
>
> ----- Original Message ----- 
> From: "Butch Bussen" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, August 15, 2012 10:26 PM
> Subject: Re: Tuning aids, noise bridges, etc.
>
>
>> Yes, of course.  Then your rig is looking at just the antenna.  Only
>> thing that might happen is rig might cut back power.  One thing to keep
>> in mind as far as noise bridges.  The vectronics has a rf senser to
>> bypass it if you accidentally transmit into it.  Older ones such as the
>> older palamars did not and I've blown up my share of those.
>> 73
>> Butch
>> WA0VJR
>> Node 3148
>> Wallace, ks.